TUX是个webserver，用来做静态文件的http-daemon,性能非常不错，与Linux进行了内核级的对接！
TUX is a http-daemon (webserver) for Linux. TUX is different from other webservers in that it runs partially from within the Linux-kernel as a module (device driver). Given sufficiently-capable networking cards, it enables direct scatter-gather DMA and hardware-based TCP/IP checksumming from the page cache directly to the network, avoiding extra data copies.
-------------------------------------------
TUX is a http-daemon (webserver) for Linux. TUX is different from other webservers in that it runs partially from within the Linux-kernel as a module (device driver). Given sufficiently-capable networking cards, it enables direct scatter-gather DMA and hardware-based TCP/IP checksumming from the page cache directly to the network, avoiding extra data copies.
-------------------------------------------
=====
TUX - Integrated Kernel-based Application Protocols Layer and Object Cache
Copyright (C) 2000, 2001 Red Hat, Inc.
Licensed under the terms of the GNU General Public License
=====
0. What's New?
--------------
Read the NEWS file to see what has changed since the last release
of TUX.
1. Introduction
---------------
TUX is a http-daemon (webserver) for Linux. TUX is different from other
webservers in that it runs partially from within the Linux-kernel as a
module (device driver). Given sufficiently-capable networking cards,
it enables direct scatter-gather DMA and hardware-based TCP/IP
checksumming from the page cache directly to the network, avoiding
extra data copies.
TUX handles static pages directly, and can work in concert with
kernel modules, user-space modules, and regular user-space
web server daemons to provide dynamic content. Regular user-space
daemons do not need to be altered in any way for TUX to use them
to provide content, but in order for TUX to cache dynamic content,
user-space code has to use a new interface based on the tux(2)
system call.
Static web pages are not a very complex thing to serve, but these are
very important nevertheless, since virtually all images are static,
and a large portion of the html pages are static also. A "regular"
webserver has little added value for static pages; it is simply a
"copy file to network" operation. This can be done very efficiently
from within the Linux kernel; for example, the nfs (network file system)
daemon performs a similar task and also runs in the kernel.
But dynamic content is becoming a larger and larger part of the
web, and TUX provides a way to cache dynamic content as well.
TUX modules (which can be build in kernel space or in user space;
user space is recommended) can create "objects" which are stored
using the page cache. To respond to a request for dynamic data, a
TUX module can send a mix of dynamically-generated data and cached
pre-generated objects, taking maximal advantage of TUX's zero-copy
architecture. (Kernel-space modules are currently the only modules
capable of making use of TUX's SSI support; that will change in the
future.)
This completely new architecture for providing dynamic content
requires a new API. Existing standard APIs for CGI are not
sufficient to be mapped to TUX's API. This means that existing
CGI applications must be re-coded in order to take advantage of
TUX's architecture. TUX can, however, call CGI programs via
its CGI module, so you can choose to convert only programs that
need TUX's speed to the TUX api and run other programs using
the standard CGI interface. TUX can also redirect requests
to another webserver, such as Apache, so on a single site, you
can mix and match static content, TUX modules, old-style CGIs,
and programs written to other webservers' APIs.
Whenever TUX isn't sure what to do (that is, encounters input
that it is not prepared to handle), it always redirects the
request to Apache to handle in an RFC-compliant manner.
Note: This document sometimes uses "Apache" instead of "any webserver
you might ever want to use", just for reasons of readability.
2. Quick Start
--------------
1) Build a kernel with tux support built in or as a module (if
necessary.
2) Configure the tux subsystem via /proc/sys/net/tux/* (or sysctl
equivalents(
3) Start the tux(8) daemon
4) Stop tux with the tux(8) program with the --stop option
N.B. Your distribution may include a /etc/rc.d/init.d/tux script;
if so, your distribution's documentation overrides this.
3. Configuration
----------------
Modes of operation
==================
There is one recommended mode of operation:
1) TUX is main webserver, "Apache" is assistant running on port 8080
(or whatever):
clientport -> 8080 (or whatever)
serverport -> 80
There is one less useful mode of operation:
2) "Apache" is main webserver, TUX is assistant
clientport -> 80
serverport -> 8080 (or whatever)
Configuring TUX
==================
Before you can start using TUX, you have to configure it. This
is done through the /proc filesystem, and can thus be done from inside
a script. Most parameters can only be set when TUX is not active.
The following things need configuration:
1) The port where TUX should listen for requests
2) The port (on "localhost") where "Apache" is listening
3) The location of the documents (documentroot)
It is very important that the documentroot for TUX matches the
documentroot for the userspace-daemon, as TUX might "redirect"
any request to this userspace-daemon.
A typical script (for the first mode of operation) to do this would
look like:
#!/bin/sh
modprobe tux
echo 8080 > /proc/sys/net/tux/clientport
echo 80 > /proc/sys/net/tux/serverport
echo /var/www > /proc/sys/net/tux/documentroot
tux $THREADS $DOCROOT $MODULES
For the second mode of operation, this would be:
#!/bin/sh
modprobe tux
echo 80 > /proc/sys/net/tux/clientport
echo 8080 > /proc/sys/net/tux/serverport
echo /var/www > /proc/sys/net/tux/documentroot
tux $THREADS $DOCROOT $MODULES
If the clientport is 8080, you also have to change the configuration of the
userspace daemon. For Apache, you do this by changing
Port 80
to
Port 8080
in /etc/apache/conf/httpd.conf. For security reasons, you can also change
BindAddress *
to
BindAddress 127.0.0.1
(in the same file) to prevent outside users from accessing Apache
directly. Only do this if TUX is the main webserver.
Instead of echoing numbers directly into /proc/sys/net/tux/*,
use /etc/sysctl.tux (/etc/sysctl.conf entries are read before
the tux module is loaded). For example,
echo 8080 > /proc/sys/net/tux/clientport
becomes a line in /etc/sysctl.tux like
net.tux.clientport = 8080
For each CGI program you have (under $DOCROOT/cgi-bin/ by default),
there must be a corresponding file under $DOCROOT (not in the cgi-bin
directory) to tell TUX that it has permission to run the CGI program.
So for TUX to run $DOCROOT/cgi-bin/foo/bar/xx, $DOCROOT/foo/bar/xx must
exist and have the permissions specified in mode_cgi. The file
$DOCROOT/foo/bar/xx must, of course, be executable.
Stopping TUX
===============
In order to change the configuration, you should stop TUX by running
"/etc/rc.d/init.d/tux stop" at a command prompt.
If this doesn't work fast enough for you (the commands above can wait for
a remote connection to close down), you can send the daemons a "HUP"
signal after you told them to stop, using "killall -HUP tux". This will
cause the daemon-threads to stop immediately.
Note that the daemons will restart immediately if they are not told to
stop.
4. Permissions
--------------
The security model of TUX is very strict. It can be, since there is a
userspace daemon that can handle the complex exceptions.
TUX only serves a file if
1) There is no "?" in the URL
2) The URL starts with a "/"
3) The file indicated by the URL exists
4) The file is world-readable (*)
5) The file is not a directory, executable or has the Sticky-bit
set (*)
6) The URL doesn't contain any "forbidden" substrings such as ".."
and "cgi-bin" (*)
7) The mime-type is known (*)
The items marked with a (*) are configurable through the
sysctl-parameters in /proc/sys/net/tux.
In all cases where any of the above conditions isn't met, the
userspace-daemon is handed the request.
5. Parameters
-------------
The following parameters are settable through /proc/sys/net/tux:
(Permissions are set via hexadecimal values, not the symbolic values
shown here for maximum clarity)
Name Default Description
serverport 80 The port where TUX listens on
clientport 8080 The port of the userspace
http-daemon
threads 2 The number of server-threads.
documentroot /var/www the directory where the
document-files are
perm_required S_IROTH Minimum permissions required
(for values see "man 2 stat")
perm_forbid dir+sticky+ Permission mask with "forbidden"
execute permissions.
(for values see "man 2 stat")
mode_cgi S_IXUGO Permission mask for CGI permision
files.
maxconnect 1000 Maximum number of concurrent
connections
