Total Pageviews

Tuesday 2 February 2016

建立一个带宽、线程可控的下载型WEB网站

APACHE+MYSQL+PHP+PROFTPD+MOD_LIMITIP+MOD_BANDWIDTH
软件版本
apache-1.3.29
mysql-4.0.16
php-4.3.4
proftpd-1.2.9
mod_limitipconn-0.04
mod_bandwidth-2.0.4
三、安装配置Mysql
# cd mysql-4.0.16
# ./configure --prefix=/usr/local/mysql --localstatedir=/usr/local/mysql/data
--disable-maintainer-mode ?with-mysqld-user=mysql --enable-large-files-without-debug
# make
# make install
添加mysql用户
# /usr/sbin/groupadd mysql
Then we create a user called mysql which belongs to the mysql group;
# /usr/sbin/useradd -g mysql mysql
安装数据库文件:
#./scripts/mysql_install_db
设置文件权限:
# chown -R root:mysql /usr/local/mysql
# chown -R mysql:mysql /usr/local/mysql/data
配置ld.so.conf
# vi /etc/ld.so.conf
增加下面一句:
/usr/local/mysql/lib/mysql
建立mysql的启动文件:
# cp support-files/mysql.server /etc/init.d/mysql
# cp support-files/my-medium.cnf /etc/my.cnf
以安全模式启动mysql:
# /usr/local/mysql/bin/mysqld_safe ?user=mysql &
设置mysql的root密码:
# /usr/local/mysql/bin/mysqladmin -u root password new_password
把mysql服务设置为开机启动:
# chmod 755 /etc/init.d/mysql
# chkconfig ?-add mysql
# chkconfig mysql on
四、安装配置PHP
#cd php-4.3.4
#./configure --prefix=/usr/local/php --with-apxs=/usr/local/apache/bin/apxs --with-mysql=/usr/local/mysql
#make
#make install
建立php的配置文件:
# cp php.ini-dist /usr/local/php/lib/php.ini
修改php的配置文件:
#vi /usr/local/php/lib/php.ini
doc_root= “/home/www/”
file_uploads=Off
register-golbals = On
建立测试php页面
# vi /home/www/test.php
# chomd 755 /home/www/test.php
五、安装apache-1.3.29
# tar zvxf apache_1.3.29.tar.gz
# cd apache_1.3.29
# cp ../mod_bandwidth.c mod_bandwidth.c
修改src/include/httpd.h 增大最大线程数
# vi src/include/httpd.h
修改其中的
#define HARD_SERVER_LIMIT 256

#define HARD_SERVER_LIMIT 2560
# ./configure --prefix=/usr/local/apache --enable-module=so
--enable-module=rewrite --enable-shared=max
--htdocsdir=/home/www --add-module=mod_bandwidth.c
--permute-module=BEGIN:bandwidth
# make
# make install
建立启动文件:
#cp apachectl /etc/init.d/httpd
修改apache的配置文件:
#vi /usr/local/apache/conf/httpd.conf
修改、添加和确认存在下列配置项:
addDefaultCharset GB2312 注释掉“addDefaultCharset ISO8859*”
ExtendedStatus On
LoadModule php4_module modules/libphp4.so
DirectoryIndex index.html index.html.var index.php
AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps
LoadModule limitipconn_module libexec/mod_limitipconn.so
AddModule mod_limitipconn.c
安装mod_limitipconn-0.04
# tar xzf mod_limitipconn-0.04.tar.gz
# cd mod_limitipconn-0.04
# vi Makefile
APXS = /usr/local/apache/bin/apxs
# make
# make install
使用mod_limitip模块需要在httpd.conf中增加这个设置
设置要控制的目录
MaxConnPerIP 2 限制每个IP的最大线程数
完成mod_bandwidth模块的安装
创建 mod_bandwidth 运行需要的目录
mkdir /var/apachebw
mkdir /var/apachebw/link
mkdir /var/apachebw/master
chmod -R 777 /var/apachebw
修改httpd.conf增加下列内容
BandWidthDataDir "/var/apachebw/"
BandWidthModule on
BandWidth 192.168.0 0 200000 制局域网内用户的下载速度为200k
BandWidth all 51200 限制其他用户的下载速度为每秒 51200 字节
修改/etc/init.d/httpd
# vi /etc/init.d/httpd
在三行之后添加如下内容:
#!/bin/sh
#
# Startup script for the Apache Web Server
# chkconfig: - 85 15
# description: Apache is a World Wide Web server. It is used to serve
# HTML files and CGI.
# processname: httpd
# pidfile &: /usr/local/apache/log/httpd.pid
# config: /usr/local/apache/conf/httpd.conf
把apache服务设置为开机启动:
# chkconfig ?-add httpd
# chmod 755 /etc/init.d/httpd
# chkconfig httpd on
六、安装porftpd-1.2.9
# tar ?zxvf proftpd-1.2.9.tar.gz
# cd proftpd-1.2.9
# ./configure --prefix=/usr/local/proftpd
# make
# make install 
建立启动文件、把proftpd设置为开机启动
# cp ./contrib/dist/rpm/proftpd.init.d /etc/rc.d/init.d/proftpd
# chkconfig --add proftpd
# chmod 755 /etc/rc.d/init.d/proftpd
# vi /etc/rc.d/init.d/functions
export PATH="/sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/proftpd/
sbin"
# vi /etc/rc.d/init.d/proftpd
config: /usr/local/proftpd/etc/proftpd.conf
PATH="$PATH:/usr/local/proftpd/sbin"
# chkconfig proftpd on
建立帐号和目录:
# mkdir /home/test
# chmod 755 /home/test
# adduser -d /home/test -g ftp -s /sbin/nologin test
# passwd test
# adduser -d /home/upload -g ftp -s /sbin/nologin upload
# passwd upload
配置/usr/local/proftpd/etc/proftpd.conf,禁用匿名登陆
ServerName "llzqq's ftp service"
ServerType standalone
DefaultServer on
# Port 21 is the standard FTP port.
Port 21
# Umask 022 is a good standard umask to prevent new dirs and files
# from being group and world writable.
Umask 022
MaxInstances 10
# Set the user and group under which the server will run.
User nobody
Group ftp
# To cause every FTP user to be "jailed" (chrooted) into their home
# directory, uncomment this line.
DefaultRoot ~
# Normally, we want files to be overwriteable.
AllowOverwrite on
# We want 'welcome.msg' displayed at login, and '.message' displayed
# in each newly chdired directory.
DisplayLogin welcome.msg
DisplayFirstChdir .message
RequireValidShell no
#Limit User of being enbled login ftp server
AllowGroup ftp
DenyAll
#
DenyGroup ftp
TransferRate RETR 51200 group ftp
DenyGroup ftp
TransferRate STOR 256000 group ftp
ServerIdent off
MaxClientsPerHost 2
TimeoutIdle 600
TimeoutLogin 300
TimeoutNoTransfer 300
TimeoutStalled 300
七、打开浏览器输入:http://your_vps_ip/test.php
如果你看到了关于:mysql;apache;php的一大堆信息,恭喜,你的安装基本上成功了,下一步可以测试一下proftp和带宽的设置了。
八、建立一个简单有效的防火墙
export PATH=/sbin:/usr/sbin:/bin:/usr/bin
modprobe iptable_nat
modprobe ip_nat_ftp
modprobe ip_nat_irc
modprobe ip_conntrack
modprobe ip_conntrack_ftp
modprobe ip_conntrack_irc
echo 1 >/proc/sys/net/ipv4/icmp_echo_ignore_broadcasts
echo 0 >/proc/sys/net/ipv4/conf/all/accept_source_route
echo 0 >/proc/sys/net/ipv4/conf/all/accept_redirects
echo 1 >/proc/sys/net/ipv4/icmp_ignore_bogus_error_responses
echo 1 >/proc/sys/net/ipv4/conf/all/log_martians
iptables -F
iptables -X
iptables -Z
iptables -A INPUT -i eth0 -s 10.0.0.0/8 -j DROP
iptables -A INPUT -i eth0 -s 192.168.0.0/16 -j DROP
##
iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
## Loopback
iptables -A INPUT -i lo -j ACCEPT
iptables -A OUTPUT -o lo -j ACCEPT
## SYN-Flooding
iptables -N syn-flood
iptables -A INPUT -i eth0 -p tcp --syn -j syn-flood
iptables -A syn-flood -m limit --limit 1/s --limit-burst 4 -j RETURN
iptables -A syn-flood -j DROP
## Make sure that new TCP connections are SYN packets
iptables -A INPUT -i eth0 -p tcp ! --syn -m state --state NEW -j DROP
## HTTP
iptables -A INPUT -i eth0 -p tcp -d 0/0 --dport 80 -j ACCEPT
## IP packets limit
iptables -A INPUT -f -m limit --limit 100/s --limit-burst 100 -j ACCEPT
iptables -A INPUT -p icmp -m limit --limit 1/s --limit-burst 3 -j ACCEPT
## FTP service
iptables -A INPUT -i eth0 -p tcp --dport 21 -j ACCEPT
iptables -A INPUT -i eth0 -p tcp --dport 20 -j ACCEPT
## SSH login
iptables -A INPUT -i eth0 -m mac --mac-source 00:00:00:00:00:00 -p tcp --dport 22 -j ACCEPT
iptables -A INPUT -i eth0 -p tcp --dport 22 -j DROP
## Anything else not allowed
iptables -A INPUT -i eth0 -j DROP
九、附录:
mod_bandwidth选项简单说明:
BandWidthPulse
格式: BandWidthPulse <毫秒(千分之一秒>
默认: 1000
上下文: per server config
改变计算带宽的时间间隔,默认为1000毫秒(1秒)。使用更低的间隔可以获得
更精确的带宽控制,但消耗更多的CPU时间,反之亦然。
BandWidth
格式: BandWidth <速率>
默认: 无
上下文: per directory, .htaccess
限制这个目录下文件下载的速率。
domain 指定来自哪个域的连接受到这个设置的影响。
ip 指定来自哪个ip地址(或者ip段)的连接受到影响。
all 所有连接都受到影响。
示例:
# 来自 dualface.com 的连接不限制下载速度
BandWidth dualface.com 0
# 来自 192.168.0.0/16(或者192.168.0) 网段的连接不限制下载速度
BandWidth 192.168.0.0/16 0
# 其他连接限制下载速度为每秒1024字节
BandWidth all 1024
# 越前面的设置优先权越高
LargeFileLimit
格式: LargeFileLimit <文件大小> <速率>
默认: 无
上下文: per directory, .htaccess
对于超过指定大小的文件,下载时使用的速率。如果速率设置0即不限制速度,
但下载速度仍然要受到BandWidth设置的影响。如果设置成-1,则完全不受影响。
通过设置不同的文件大小和速率,可以设置不同大小范围内文件的下载速度。
示例:
文件尺寸大于等于200千字节的文件,下载速率为每秒3072字节
LargeFileLimit 200 3072
LargeFileLimit 1024 2048
MaxConnection
格式: MaxConnection <连接数>
默认: 0 (不限制)
上下文: per directory, .htaccess
当超过指定连接数时,拒绝新的连接。
MinBandWidth
格式: MinBandWidth <速率>
默认: all 256
上下文: per directory, .htaccess
设置最小带宽,默认为每秒256字节。根据BandWidth和LargeFileLimit设置的速
率。mod_bandwidth会计算允许的连接数。例如BandWidth为4096字节,而
MinBandWidth为1024字节,则最大并发连接数为4。
Mod_limitipconn选项简单说明:
设置要控制的目录
MaxConnPerIP 2 限制单IP并发连接数
NoIPLimit image/* 不受限制的文件类型
MaxConnPerIP 1
OnlyIPLimit audio/mpeg video 仅用于限制的文件类型.