Create A Custom PXE.iso

Steps to create a bootable disk/iso that runs an iso from mirror.clarkson.edu (you may replace this url with one of your choice, but you are responsible for setting your mirror up appropriately).

Contents  [hide]  1 Initial setup 2 Get the gPXE image 3 Create our config file 4 Add isolinux.bin 5 Create the iso

Initial setup

• Create a new folder, called 'BURN'. This will contain our files and

eventually be turned into an iso.

Get the gPXE image

• The easiest way to do this is to go to http://www.slitaz.org/en/get/.
• Download the latest version of SliTaz.
• Open the .iso file you downloaded with an archive manager and navigate to

/boot.

• Copy 'gpxe' into your BURN folder.

Create our config file

• Create a new file in BURN, called isolinux.cfg.
• Enter the following into isolinux.cfg:

DEFAULT gpxe

PROMPT 0

TIMEOUT 20

LABEL gpxe

MENU LABEL Web Boot (gpxe)

KERNEL /gpxe

APPEND url=http://mirror.clarkson.edu/pxe/pxelinux.0

Add isolinux.bin

• Run 'locate isolinux.bin'.
• Copy isolinux.bin into your BURN folder.

Create the iso

• Navigate to BURN.
• Run the following

'genisoimage -o gPXEimage.iso -b isolinux.bin -no-emul-boot \ -boot-load-size 4 -boot-info-table -J ~/BURN/'

• And you're done! Your iso is called gPXEimage.iso, in the BURN folder.