docker-govpn

GoVPN is a simple free software virtual private network daemon, aimed to be reviewable, secure, DPI/censorship-resistant, written on Go.
This is the dockefile for govpn.
Its size is just 37MB. small enough?

How to run it

$: docker pull shinvdu/govpn
$: docker run -it --rm --device=/dev/net/tun:/dev/net/tun -p 1194:1194/udp  --cap-add=NET_ADMIN  shinvdu/govpn

make sure to use custom setting in VOLUME ["/etc/govpn"], just mount.

$: docker run -it --rm \
   --device=/dev/net/tun:/dev/net/tun \
   -p 1194:1194/udp \
   -v /etc/govpn:/etc/govpn  \
   --cap-add=NET_ADMIN  shinvdu/govpn

How to create your own auth key?

$: docker run -it --rm shinvdu/govpn newclient Govpn
Type a pass, It generate a auth key for you. it looks like below.

Your client verifier is: $argon2d$m=4096,t=128,p=1$ns8qW3Sru5hq3V35LYioug

Place the following YAML configuration entry on the server's side:

    Silas:
        up: /path/to/up.sh
        iface: or TAP interface name
        verifier: $argon2d$m=4096,t=128,p=1$ns8qW3Sru5hq3V35LYioug$rWRXMDzSaa1IXYMVNRM4lPlJ929fkbjhorudL6iRc9I

get the verifier, and replace the default one in config/peers.yaml. This is the only step you need to do.

How to use client to connect?

example

1. create the network interface:

tunctl -t tap14
ip addr add 172.19.0.2/24 dev tap14
ip link set up dev tap14

2. create a file hold the pass $: echo 'govpn' > /usr/local/src/govpn-5.7/key.txt

govpn is is pass I just type.

3. connect.

$: sudo ./govpn-client \
   -verifier  '$argon2d$m=4096,t=128,p=1$B4GsJkH/T+BG0/iOUkkt/w$GOEZuuAuucwIIX8zKUzYPeVdQxJpudO3jB1rv1rjztk'  \
  -iface [tap14]  \
  -remote [public ip]:1194 \
  -key  /usr/local/src/govpn-5.7/key.txt

4. check connect status client side log output:

2016/12/16 08:03:30.342891 udp.go:89: Handshake completed
service side log output:

2016/12/16 08:21:56.840962 udp.go:99: Peer handshake finished: 172.17.42.1:38760 B4GsJkH/T+BG0/iOUkkt/w
2016/12/16 08:21:56.846214 udp.go:166: Peer created: B4GsJkH/T+BG0/iOUkkt/w

ping to check package alive

➜  ~ ping 172.19.0.1                                                                                                                                                                                            
PING 172.19.0.1 (172.19.0.1) 56(84) bytes of data.
64 bytes from 172.19.0.1: icmp_seq=9 ttl=64 time=1.10 ms
64 bytes from 172.19.0.1: icmp_seq=10 ttl=64 time=0.711 ms
64 bytes from 172.19.0.1: icmp_seq=11 ttl=64 time=0.679 ms
64 bytes from 172.19.0.1: icmp_seq=12 ttl=64 time=0.665 ms

Setup host routing

After startup

sudo ip route add  0.0.0.0/1 via 172.19.0.1 dev tap14 
sudo ip route add  [public ip]  via  192.168.1.1 dev eth0

After shutdown

sudo ip route delete  0.0.0.0/1 via 172.19.0.1 dev tap14 
sudo ip route delete  [public ip]  via  192.168.1.1  dev eth0 

from https://github.com/shinvdu/docker-govpn