Simple UDP tun/tap-based tunnel with mcrypt encryption.
Usage: udptap_tunnel [-6] <localip> <localport> <remotehost> <remoteport>
Environment variables:
TUN_DEVICE /dev/net/tun
DEV_NAME name of the device, default tun0
IFF_TUN if set, uses point-to-point instead ot TAP.
MCRYPT_KEYFILE -- turn on encryption, read key from this file
MCRYPT_KEYSIZE -- key size in bits, default 256
MCRYPT_ALGO -- algorithm, default is twofish. aes256 is called rijndael-256
MCRYPT_MODE -- mode, default is CBC
Note that each packet is encrypted separately and there is no filtering of invalid packets. Replay-based attacks will work. Transferring some file using this tunnel's encryption feature is less secure than encrypting the file and then transferring it.
The project is named "udptap_tunnel" because of there is already other udptap on Github.
Usage example:
on server:
IFF_TUN=1 DEV_NAME=udp0 MCRYPT_KEYFILE=/root/my.key udptap_tunnel 0.0.0.0 3443
ip addr add 192.168.90.1/30 dev udp0
ip link set udp0 up
ip link set udp0 mtu 1280
IFF_TUN=1 MCRYPT_KEYFILE=/root/my.key DEV_NAME=udp0 udptap_tunnel 0.0.0.0 0 1.2.3.4 3443
ip link set udp0 up
ip addr add 192.168.90.2/30 dev udp0
ip link set ppp8 mtu 1280
tap_mcrypt
tap_mcrypt - create TAP device that sends/receives encrypted packets to interface It uses EtherType 0x08F4.Usage: tap_mcrypt plaintext_interface {auto|destination_mac_address}
Example: tap_mcrypt wlan0 auto
(note that ff:ff:ff:ff:ff:ff may work bad in Wi-Fi)
Environment variables:
TUN_DEVICE /dev/net/tun
DEV_NAME name of the device, default tun%d
SOURCE_MAC_ADDRESS -- by default use interface's one
IFF_TUN if set, uses point-to-point instead ot TAP.
MCRYPT_KEYFILE -- turn on encryption, read key from this file
MCRYPT_KEYSIZE -- key size in bits, default 256
MCRYPT_ALGO -- algorithm, default is twofish. aes256 is called rijndael-256
MCRYPT_MODE -- mode, default is CBC
Networking with more than two peers (without locking to broadcast mode) is not implemented. Use https://github.com/vi/udptap_tunnel/issues/new if you want tap_mcrypt to have it.
vethify
Usage: vethify interface1 interface2
Example: vethify wlan0 veth0
Environment variables:
SOURCE_MAC_ADDRESS1 -- by default use interface's one
SOURCE_MAC_ADDRESS2 -- by default use interface's one
DEBUG=0,1,2 print send and recv packets
Primary use case: workaround inability to move wireless connections to other network namespaces on Linux
Setup Wi-Fi connection on wlan0, but don't configure any addresses on it
then create veth0/veth1 pair, use vethify to exchange packets between unmanagable wlan0 and manageable veth0
then move veth1 to your namespace and setup IPv4/IPv6 addresses there
tap_copy
Usage: tap_copy interface
Example: tap_copy eth0
Environment variables:
TUN_DEVICE /dev/net/tun
DEV_NAME name of the device, default tun%d
SOURCE_MAC_ADDRESS -- by default use interface's one
DEBUG=0,1,2 print send and recv packets
seqpackettool
socat seems to lack support of AF_UNIX SOCK_SEQPACKET. So I implemented poor man's socat that allows you to connect and listen AF_UNIX SOCK_SEQPACKET sockets, exchanging data between them and SCTP or started processes. It can also start two processes, mutually (circularly) connected by a seqpacket socket pairt.Usage: seqpackettool [options] part part
part := listen_unix | connect_unix | listen_sctp | connect_sctp | startp | stdiop
stdiop := '-' # use fd 0 for recv and fd 1 for send
listen_unix := 'unix_listen' addressu
connect_unix := 'connect' addressu
listen_sctp := 'sctp_listen4' address4 port | 'sctp_listen6' address6 port
connect_sctp := 'sctp_connect4' address4 port | 'sctp_connect6' address6 port
startp := 'start' '--' full_path_to_program argv0 ... argvN '--'
addressu - /path/to/unix/socket or @abstract_socket_address
You may use more than two dashes in delimiters to allow '--' inside argv.
BUFSIZE environment variable adjusts buffer size
Options:
--listen-once - don't fork, accept only one connection
--unidirectional - only recv from first and send to second part
--allow-empty - don't shutdown connection on empty packets
Examples:
seqpackettool sctp4_listen 0.0.0.0 6655 sctp4_listen 127.0.0.1 5566
emulate socat sctp-listen:6655,fork,reuseaddr sctp-listen:5566,reuseaddr,bind=127.0.0.1
seqpackettool unix_listen @myprog start -- /usr/bin/my_program my_program arg1 arg2 --
for each incoming connection at abstract address 'myprog',
start the program and provide the seqpacket socket as stdin/stdout
seqpackettool - unix_connect /path/to/socket
exchange data between stdin/stdout and AF_UNIX seqpacket socket
ipvampire
Sniff the given interface for IPv4 or IPv6 packets belonging to the given subnet and copy them to stdout. Inject packets appearing on stdin to the interface back.Use case: OpenVPN-ing a part of networking out of restrictive VPN (such as OpenVZ without tun/tap enabled).
Usage: ipvampire interface {-6|-4} ip_address/netmask
Example: ipvampire venet0 -6 2a01:4f8:162:732f:419::acbd/84
Environment variables:
SOURCE_MAC_ADDRESS1 -- by default use interface's one
DEBUG=0,1,2 print send and recv packets
Implemented by Vitaly "_Vi" Shukela based on Robert M Supnik's code
Example:
./seqpackettool start -- ./openvpn openvpn --dev stdout --log /dev/stderr -- start -- ./ipvampire ./ipvampire venet0 -6 2a01:4f8:162:732f:419:8000::/88 --
udpjump
Allow OpenVPN to jump from UDP socket to UDP socket, avoiding long-lived associations. A workaround against problems in a particular network.Usage: udpjump {listen|connect|listen6|connect6} address post {listen|connect|listen6|connect6} multiport_address multiport_port1 multiport_port2 ... multiport_portN
Environment variables:
MINISESSION_TIMEOUT_MS=3000 (milliseconds)
Example:
on server: udpjump connect 127.0.0.1 1194 listen 0.0.0.0 {4000.4039}
on client: udpjump listen 127.0.0.1 1195 connect 1.2.3.4 {4000.4039}
from https://github.com/vi/udptap_tunnel
No comments:
Post a Comment