Anyconnect client作为虚拟路由器使用。

Features

• Anyconnect client as a router.
• Customize routing table the way you like(chnroutes applied by default)

Prerequisites

• Vagrant
• VirtualBox

Usage

1. Check bridge in Vagrantfile, modify if necessary.
2. Start the virtual router via vagrant up .
3. vagrant ssh into the router.
4. Connect: anyconnect connect your.anyconnect-server.com username password (Modify parameters accordingly).
5. ifconfig eth1 Use the IP address of eth1 as your Gateway (you can also use the IP as your DNS server).
6. Disconnect: anyconnect disconnect (Remember to run this even when the tunnel is broken by accident).

TODO

• sync provisioning/etc/cn/apnic_cn_routes.tsv with chnroutes
• sync provisioning/etc/dnsmasq.d/*.conf with dnsmasq-china-list
• Web pages for admin

from  https://github.com/mckelvin/anyconnect-virtual-router

相关帖子：https://briteming.blogspot.com/2018/03/vrouter.html