ws-vpn（本地机器需为linux系统）

A VPN implementation over websockets. This is the client/server implementation of a layer-2 software switch able to route packets over websockets connections. The ws-vpn is built on top of Linux's tun/tap device.

Configuration

There are two config files to distinguish between client and server.

To start server execute the following command:

ws-vpn --config server.ini

client:

ws-vpn --config client.ini

Download

You can get updated release from: https://github.com/zreigz/ws-vpn/releases

Build and Install

Building ws-vpn needs Go 1.1 or higher.

ws-vpn is a go-gettable package:

go get github.com/zreigz/ws-vpn

Network forwarding

On the server the IP forwarding is needed. First we need to be sure that IP forwarding is enabled. Very often this is disabled by default. This is done by running the following command line as root:

# sysctl -w net.ipv4.ip_forward=1
# iptables -t nat -A POSTROUTING -j MASQUERADE

So, lets look at the iptables rules required for this to work.

# Allow TUN interface connections to VPN server
iptables -A INPUT -i tun0 -j ACCEPT

 # Allow TUN interface connections to be forwarded through other interfaces
iptables -A FORWARD -i tun0 -j ACCEPT

iptables -t nat -A POSTROUTING -o tun0 -j MASQUERADE

iptables -A FORWARD -i eth0 -o tun0 -j ACCEPT

iptables -A FORWARD -i tun0 -o eth0 -m state --state RELATED,ESTABLISHED -j ACCEPT

from https://github.com/zreigz/ws-vpn

https://github.com/zreigz/ws-vpn/issues/1