JINGO

Node.js based Wiki.

A git based wiki engine written for node.js, with a decent design, a search capability and a good typography.

Table of contents

• Introduction
• Features
• Installation
• Authentication and Authorization
• Known limitations
• Customization
• Editing
• Configuration options reference

Introduction

The aim of this wiki engine is to provide an easy way to create a centralized documentation area for people used to work with git and markdown. It should fit well into a development team without the burden to have to learn a complex and usually overkill application.

Jingo is very much inspired by (and format-compatible with) the github own wiki system Gollum, but it tries to be more a stand-alone and complete system than Gollum is.

Think of jingo as "the github wiki, without github but with more features". "Jingo" means "Jingo is not Gollum" for more than one reason.

There is a demo server running at http://jingo.cica.li:6067/wiki/home

Features

• No database: Jingo uses a git repository as the document archive
• Markdown for everything, github flavored
• Jingo uses Codemirror or Markitup as the markup editor, with a nice (ajax) preview (see the features key in the config file)
• It provides a "distraction free", almost full screen editing mode
• Compatible with a wiki created with the Gollum wiki
• Revision history for all the pages (with restore)
• Show differences between document revisions
• Paginated list of all the pages, with a quick way to find changes between revisions
• Search through the content and the page names
• Page layout accepts custom sidebar and footer
• Gravatar support
• Can include IFRAMEs in the document (es: embed a Google Drive document)
• Generate Table of Contents for pages
• Can use custom CSS and JavaScript scripts
• White list for authorization on page reading and writing
• Detects unwritten pages (which will appear in red)
• Automatically push to a remote (optionally)
• Mobile friendly (based on Bootstrap 3.x)
• Quite configurable, but also works out of the box
• Works well behind a proxy (i.e.: the wiki can be "mounted" as a directory in another website)
• Pages can be embedded into another site
• Authentication via Google, Github, LDAP and local name/password

For code syntax highlighting, Jingo uses the node-syntaxhighlighter module. For the list of supported languages, please refer to this page.

Installation

npm install -g jingo or download/clone the whole thing and run npm install.

Note: if you already have Jingo installed, please also run npm prune (some modules can be stale and need to be removed).

Jingo needs a config file and to create a sample config file, just run jingo -s, redirect the output on a file and then edit it (jingo -s > config.yaml). The config file contains all the available configuration options. Be sure to provide a valid server hostname (like wiki.mycompany.com) if you use a 3rd party provider for authentication (like Google or GitHub). It is needed for them to be able to get back to you.

This document contains also the reference for all the possible options.

If you define a remote to push to, then Jingo will automatically issue a push to that remote every pushInterval seconds. To declare a remote for Jingo to use, you'll need to identify the name of your local remote. The following example shows how a local remote is typically defined:

git remote add origin https://github.com/joeuser/jingorepo.git'

Based on that example, you would update config.yaml with the remote name "origin" as follows:

remote: "origin"

You can also use the git remote command to get the name of your remote.

You can also specify a branch using the syntax "remotename branchname". If you don't specify a branch, Jingo will use master. Please note that before the push, a pull will also be issued (at the moment Jingo will not try to resolve conflicts, though).

The basic command to run the wiki will then be

jingo -c /path/to/config.yaml

Before running jingo you need to initialise its git repository somewhere (git init is enough). Additionally the user running the process needs to have git config --global user.name and git config --global user.email configured. Else your document's repo will get scrambled and you have to reinitialize it again (rm -rf .git && git init).

If you define a remote to push to, be sure that the user who'll push has the right to do so. This means you have to configure the remote via the git:// URI that uses ssh authentication to push and have created and published the process user's ssh public key to the remote.

If your documents reside in subdirectory of your repository, you need to specify its name using the docSubdir configuration option. The repository path must be an absolute path pointing to the root of the repository.

If you want your wiki server to only listen to your localhost, set the configuration key localOnly to true.

Authentication and Authorization

You can enable the following strategies: Google logins (OAuth2), GitHub logins (OAuth2), ldap logins or a simple, locally verified username/password credentials match (called "local").

The Google Login and the GitHub login uses OAuth 2 and that means that on a fresh installation you need to get a client id and a client secret from Google or GitHub and put those informations in the configuration file.

For Google, follow these instructions (you need to be logged in in Google):

• Open the Google developer console
• Create a new project (you can leave the Project id as it is). This will take a little while
• Open the Consent screen page and fill in the details (particularly, the product name)
• Now open APIs & auth => Credentials and click on Create new client id
• Here you need to specify the base URL of your jingo installation. Google will fill in automatically the other field with a /oauth2callback URL, which is fine
• Now you need to copy the Client ID and Client secret in your jingo config file in the proper places

For GitHub, follow these instructions (you need to be logged in in GitHub):

• Register a new application here
• Enter whatever Application name you want
• Enter your installation URL (localhost is OK, for example "http://localhost:6767/")
• Enter /auth/github/callback as the Authorization callback URL
• Press the Register application button
• In the following page, on the top right corner, take note of the values for Client ID and Client Secret
• Now you need to copy the Client ID and Client secret in your jingo config file in the proper places

Warning In certain cases the Github authentication system return an empty email and Jingo is not happy about this. To avoid problems, when using Github set the authorization.emptyEmailMatches configuration option to true.

The ldap method uses url as the ldap server url, and optionally a bindDn and bindCredentials if needed. The searchBase and searchFilter are required for searching in the tree. In the configuration searchAttributes is also available. Since we want to install the (binary) support to LDAP only when needed, please manually npm install passport-ldapauth to use the LDAP support.

The local method uses an array of username, passwordHash and optionally an email. The password is hashed using a non salted SHA-1 algorithm, which makes this method not the safest in the world but at least you don't have a clear text password in the config file. To generate the hash, use the --hash-string program option: once you get the hash, copy it in the config file.

You can enable all the authentications options at the same time. The local is disabled by default.

The authorization section of the config file has three keys: anonRead, validMatches and emptyEmailMatches.

If anonRead is true, then anyone who can access the wiki can read anything. If anonRead is false you need to authenticate also for reading and then the email of the user must match at least one of the regular expressions provided via validMatches, which is a comma separated list. There is no "anonWrite", though. To edit a page the user must be authenticated.

emptyEmailMatches allows access when remote authentication providers do not provide an email address as part of user data. It defaults to false, but will usually need to be set to true for GitHub authentication (GitHub only returns email addresses that have been made public on users' GitHub accounts).

The authentication is mandatory to edit pages from the web interface, but jingo works on a git repository; that means that you could skip the authentication altogether and edit pages with your editor and push to the remote that jingo is serving.

Known limitations

• The authentication is mandatory (no anonymous writing allowed). See also issue #4
• The repository is "flat" (no directories or namespaces)
• Authorization is only based on a regexp'ed white list with matches on the user email address
• There is one authorization level only (no "administrators" and "editors")
• No scheduled pull or fetch from the remote is provided (because handling conflicts would be a bit too... interesting)

Please note that at the moment it is quite "risky" to have someone else, other than jingo itself, have write access to the remote / branch jingo is pushing to. The push operation is supposed to always be successfull and there is no pull or fetch. You can of course manage to handle pull requests yourself.

Customization

You can customize jingo in four different ways:

• add a left sidebar to every page: just add a file named _sidebar.md containing the markdown you want to display to the repository. You can edit or create the sidebar from Jingo itself, visiting /wiki/_sidebar (note that the title of the page in this case is useless)
• add a footer to every page: the page you need to create is _footer.md and the same rules for the sidebar apply
• add a custom CSS file, included in every page as the last file. The default name of the file is _style.css and it must reside in the document directory (but can stay out of the repo). It is not possible to edit the file from jingo itself
• add a custom JavaScript file, included in every page as the last JavaScript file. The default name of the file is _script.js and it must reside in the document directory (but can stay out of the repo). It is not possible to edit the file from jingo itself

All these names are customizable via the customizations option in the config file (see the reference).

Once read, all those files are cached (thus, not re-read for every page load, but kept in memory). This means that for every modification in _style.css and _script.js you need to restart the server (sorry, working on that).

This is not true for the footer and the sidebar but ONLY IF you edit those pages from jingo (which in that case will clear the cache by itself).

Editing

To link to another Jingo wiki page, use the Jingo Page Link Tag.

[[Jingo Works]]

The above tag will create a link to the corresponding page file named jingo-works.md. The conversion is as follows:

1. Replace any spaces (U+0020) with dashes (U+002D)
2. Replace any slashes (U+002F) with dashes (U+002D)

If you'd like the link text to be something that doesn't map directly to the page name, you can specify the actual page name after a pipe:

[[How Jingo works|Jingo Works]]

The above tag will link to Jingo-Works.md using "How Jingo works" as the link text.

Images

If you put images into the repository, Jingo will be able to serve them. You can enable Jingo to serve even other file types from the document directory: you need to change the staticWhitelist configuration option.

Configuration options reference

application.title (string: "Jingo")

This will be showed on the upper left corner of all the pages, in the main toolbar

application.logo (string: "")

Supply the full URL to an image to be shown as the logo of your wiki. It will appear on the left of the page title in the navigation bar. Just set the application.title to an empty string to only show the Logo image. Please note that Jingo does not resize the image in any way (you can do it yourself using a custom CSS of course)

application.favicon (string: "")

Supply the full URL to an image to be shown as the favicon of your wiki. Please note that Jingo will try to get the mime type of the image from its extension (this can easily fail for a lot of reasons)

application.repository (string: "")

Absolute path for your documents repository (mandatory).

application.docSubdir (string: "")

If your documents reside inside a directory of the repository, specify its name here.

application.remote (string: "")

This is the name of the remote you want to push/pull to/from (optional). You can also specify a specific branch using the syntax “remotename branchname”. If you don’t specify a branch, Jingo will use master.

application.pushInterval (integer: 30)

Jingo will try to push to the remote (if present) every XX seconds

application.secret (string: "change me")

Just provide a string to be used to crypt the session cookie

application.git (string: "git")

You can specify a different git binary, if you use more than one in your system

application.skipGitCheck (boolean: false)

Jingo will refuse to start if a version of git is found which is known to be problematic. You can still force it to start anyway, providing true as the value for this option

application.loggingMode (integer: 1)

Specifies how verbose the http logging should be. Accepts numeric values: 0 for no logging at all, 1 for the a combined log and 2 for a coincise, coloured log (good for development)

application.pedanticMarkdown (boolean: true)

(the default was false in jingo < 1.1.0)

The markdown module we use (Marked) tries to overcome some "obscure" problems with the original Perl markdown parser by default. This produces some problems when rendering HTML embedded in a markdown document (see also issue #48). By default we now want to use the original parser and not the modified one (pedantic: true).

With this option you can revert this decision if for some reason your documents are not rendered how you like.

application.gfmBreaks (boolean: true)

Enable GFM line breaks

application.proxyPath (string: "")

If you want jingo to work "behind" another website (for example in a /wiki directory of an already existing intranet), you need to configure it to be aware of that situation so that it can write all the outbound URLs accordingly. Use this option to pass it the name of the directory that you've configured in your proxy_pass option in nginx or apache. See also an nginx example in the /etc directory of the jingo source distribution.

Please note that jingo won't work correctly if this option is activated.

application.allowHtml (boolean: false) New since version 1.9.0

Since version 1.9.0 Jingo sanitizes HTML by default, escaping it while rendering Markdown. Esplicitely enable html rendering again with the allowHtml option set to true. Remember that this will also enable, among all the other HTML elements, rendering of <script> though, so beware!

Setting this option to true will generate a warning during Jingo startup.

Also note that Jingo session cookie is http only and cannot be read by JavaScript.

authentication.staticWhitelist (string: "/\.png$/i, /\.jpg$/i, /\.gif$/i")

This is to enable jingo to serve any kind of static file (like images) from the repository. By default, Jingo will serve *.md files and *.jpg, *.png, *.gif. Provide the values as a comma separated list of regular expressions.

authentication.google.enabled (boolean: true)

Enable or disable authentication via Google logins

authentication.google.clientId

authentication.google.clientSecret

Values required for Google OAuth2 authentication. Refer to a previous section of this document on how to set them up.

authentication.google.redirectUrl (string: /oauth2callback)

Specifies a custom redirect URL for OAuth2 authentication instead of the default

authentication.github.enabled (boolean: false)

Enable or disable authentication via Github logins

authentication.github.clientId

authentication.github.clientSecret

Values required for GitHub OAuth2 authentication. Refer to a previous section of this document on how to set them up.

authentication.google.redirectUrl (string: /auth/github/callback)

Specifies a custom redirect URL for OAuth2 authentication instead of the default

authentication.ldap.enabled (boolean: false)

Enable or disable authentication via LDAP logins Requires manual installation of passport-ldapauth module via npm

authentication.ldap.url

authentication.ldap.bindDn

authentication.ldap.bindCredentials

authentication.ldap.searchBase

authentication.ldap.searchFilter

authentication.ldap.searchAttributes

authentication.local.enabled (boolean: false)

The Local setup allows you to specify an array of username/password/email elements that will have access to the Wiki. All the accounts must resides in the configuration authentication.local.accounts array

authentication.local.[accounts].username

Provide any username you like, as a string

authentication.local.[accounts].passwordHash

Use an hash of your password. Create the hash with jingo -# yourpassword

authentication.local.[accounts].email

If you want to use Gravatar, provide your gravatar email here.

authentication.alone.enabled (deprecated)

Boolean, defaults to false The Alone authentication option is deprecated in favor of the Local one

authentication.alone.username (deprecated)

Provide any username you like, as a string The Alone authentication option is deprecated in favor of the Local one

authentication.alone.passwordHash (deprecated)

Use an hash of your password. Create the hash with jingo -# yourpassword The Alone authentication option is deprecated in favor of the Local one

authentication.alone.email (deprecated)

If you want to use Gravatar, provide your gravatar email here. The Alone authentication option is deprecated in favor of the Local one

features.markitup (boolean: false)

DEPRECATED: markitup support has been removed as of version 1.8.0

features.codemirror (boolean: true)

Whether to enable Codemirror or not.

features.gravatar (boolean: true)

Whether to enable gravatar support or not

server.hostname

This is the hostname used to build the URL for your wiki pages. The reason for these options to exist is due to the need for the OAuth2 authentication to work (it needs an endpoint to get back to)

server.port

Jingo will listen on this port

server.localOnly

Set this to true if you want to accept connection only from localhost (default false)

server.CORS.enabled (boolean: false)

Enable or disable CORS headers for accessing a page through an ajax call from an origin which is not the one which serves Jingo. Use this option if for example you want to embed a (rendered) page inside a page of another website.

The configuration options for CORS are at the moment quite limited: via an Ajax call you can only read (GET) a wiki page (that is, the /wiki/NameOfYourPage path), or issue a search. Once you enable this option, all the wiki page will be accessible. Please note that no authentication check is made, which means that the Ajax calls will be denied if the anonRead configuration option will be false (all or nothing).

You can also white-list origin via the following option (CORS.allowedOrigin)

server.CORS.allowedOrigin (string: "*")

Set the allowed origin for your CORS headers. All the Ajax calls to the wiki pages must come from this origin or they will be denied. The default is "*", which means that all the origins will be allowed

server.baseUrl

The baseUrl is usually automatically generated by Jingo (with "//" + hostname + ":" + port), but if for some reason you need to overrideit, you can use this option

authorization.anonRead (boolean: true)

Enables/disables the anonymous access to the wiki content

authorization.validMatches (string: ".+")

This is a regular expression which will be used against the user email account to be able to access the wiki. By default all emails are OK, but you can for example set a filter so that only the hostname from your company will be allowed access.

authorization.emptyEmailMatches (boolean: false)

If the endpoint doesn't provide the email address for the user, allow empty emails to authenticate anyway. Note that GitHub authentication usually requires this to be true (unless all wiki users have public email addresses on their GitHub accounts).

pages.index (string: "Home")

Defines the page name for the index of the wiki

pages.title.fromFilename (boolean: true)

If this is true, the title of each page will be derived from the document's filename. This is how Gollum works and from Jingo 1.0 this is now the default. An important consequence of this behavior is that now Jingo is able to rename documents (according to the new name it will be eventually given to), while previously it was impossible.

pages.title.fromContent (boolean: false)

If this is true, the title of the document will be part of the document itself (the very first line). This is the default behavior of Jingo < 1.0 and the default is now false. If you have an old installation of Jingo, please set this value to true and fromFilename to false.

pages.title.asciiOnly (boolean: false)

If this is set to true, Jingo will convert any non-Ascii character present in the title of the document to an ASCII equivalent (using the transliteration module), when creating the filename of the document. Default was true for Jingo < 1.0 while for Jingo >= 1.0 the default is false

pages.title.lowercase (boolean: false)

If this is set to true, Jingo will lowercase any character of the title when creating the filename. Default was true for Jingo < 1.0 while for Jingo >= 1.0 the default is false

pages.title.itemsPerPage (integer: 10)

This defines how many page item to show in the "list all page" page. Keep this value as low as possible for performance reasons.

customizations.sidebar (string: "_sidebar.md")

Defines the name for the sidebar component. Defaults to _sidebar.md. Please note that if you need to use a wiki coming from Github, this name should be set to _Sidebar

customizations.footer (string: "_footer.md")

Defines the name for the footer component. Defaults to _footer.md. Please note that if you need to use a wiki coming from Github, this name should be set to '_Footer'

customizations.style (string: "_style.md")

Defines the name for the customized style CSS component. Defaults to _style.css.

customizations.script (string: "_script.md")

Defines the name for the customized script JavaScript component. Defaults to _script.js.

from  https://github.com/claudioc/jingo