Introduction
Some operating systems allow the generation of virtual network interfaces that do not connect to a wire but to a process that simulates the network. Often these devices are called TUN or TAP.socat provides an address type that creates a TUN device on Linux; the other socat address can be any type; it transfers the "wire" data as desired.
This document shows how a simple virtual network can be created between two hosts that may be far (many network hops) apart. On both hosts a socat instance is started that connects to the other host using TCP and creates a TUN device. See socat-openssltunnel.html for a guide on securing the connection using SSL.
The following IP addresses are used in the example; replace them in the following commands with the requirements of your situation:
| host | address | mask |
|---|---|---|
| physical "server" address | 1.2.3.4 | n/a |
| physical "client" address | n/a | n/a |
| TUN on "server" | 192.168.255.1 | 255.255.255.0 |
| TUN on "client" | 192.168.255.2 | 255.255.255.0 |
On "default" Linux installations, creating TUN/TAP devices might require root privilege.
Generate TUN devices with socat
In this section two instances of socat are used to generate TUN devices on different hosts and connect the "wire" sides, providing a simple virtual network.We distinguish server and client only with respect to the connection between the two socat instances; the TUN interfaces both have the same quality.
TUN Server
socat -d -d TCP-LISTEN:11443,reuseaddr TUN:192.168.255.1/24,up After starting this command, socat will wait for a connection and then create a TUN pseudo network device with address 192.168.255.1; the bit number specifies the mask of the network that is pretended to be connected on this interface.TUN Client
socat TCP:1.2.3.4:11443 TUN:192.168.255.2/24,up This command should establish a connection to the server and create the TUN device on the client.Seeing it work
After successful connection both TUN interfaces should be active and transfer date between each other using the TCP connection. Try this by pinging 192.168.255.1 from the client and 192.168.255.2 from the server.TCP/IP version 6
IPv6 as transport should work just like any TCP/IPv6 connection.Creation of an IPv6 virtual interface is not directly possible, but you can generate an IPv4 interface as described above, and add IPv6 addresses using the ifconfig command.
Troubleshooting
Test TUN integration
If you get error messages like this:| ... E unknown device/address "tun" |
Missing kernel support
An error message like:| ... E open("/dev/net/tun", 02, 0666): No such file or directory |
TUN cloning device permissions
An error message like:| ... E open("/dev/net/tun", 02, 0666): Permission denied |
Interface down
If no error occurs but the pings do not work check if the network devices have been created:ifconfig tun0 The output should look like:
tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:192.168.255.1 P-t-P:192.168.255.1 Mask:255.255.255.0
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Check the "UP" keyword; you forget the "up" option in the socat command if
it is missing.Check if the correct IP address and network mask are displayed.
Routing
netstat -an |fgrep 192.168.255 The output should look like:192.168.255.0 0.0.0.0 255.255.255.0 U 0 0 0 tun0
Other problems
Another reason for failure might be iptables.Run socat with options -d -d -d, this will show every data transfer between the two processes. Each ping probe should cause a forth and a back transfer.
History
Linux TUN/TAP support was added to socat in version 1.6.0.This document was last modified in April 2009.
More info about socat TUN/TAP support
Links regarding this tutorial
socat address tunsocat options for TUN/TAP addresses
TUN/TAP optionsReferences
socat home pagesocat man page
OpenVPN home page
TUN/TAP on Wikipedia
from http://www.dest-unreach.org/socat/doc/socat-tun.html
