NoRouter

NoRouter: IP-over-Stdio. The easiest multi-host & multi-cloud networking ever. No root privilege is required.

https://norouter.io/

NoRouter (IP-over-Stdio) is the easiest multi-host & multi-cloud networking ever:

• Works with any container, any VM, and any baremetal machine, on anywhere, as long as the shell access is available (e.g. docker exec, kubectl exec, ssh)
• Omnidirectional port forwarding: Local-to-Remote, Remote-to-Local, and Remote-to-Remote
• No routing configuration is required
• No root privilege is required (e.g. sudo, docker run --privileged)
• No public IP is required
• Provides several network modes
  • Loopback IP mode (e.g. 127.0.42.101, 127.0.42.102, ...)
  • HTTP proxy mode with built-in name resolver
  • SOCKS4a and SOCKS5 proxy mode with built-in name resolver
• Easily installable with a single binary, available for Linux, macOS, BSDs, and Windows

Web site: https://norouter.io/

---

• What is NoRouter?
• Download
• Quick usage
  • Example 1: Port forwarding across localhost + Docker + Kubernetes + LXD + SSH
  • Example 2: Virtual VPN connection into docker network create networks
  • Example 3: Virtual VPN connection into Kubernetes networks
  • Example 4: Aggregate VPCs of AWS, Azure, and GCP
• Documentation
• Installing NoRouter from source
• Contributing to NoRouter

What is NoRouter?

NoRouter implements unprivileged networking by using multiple loopback addresses such as 127.0.42.101 and 127.0.42.102. The hosts in the network are connected by forwarding packets over stdio streams like docker exec, kubectl exec, ssh, and whatever.

Unlike traditional port forwarders such as docker run -p, kubectl port-forward, ssh -L, and ssh -R, NoRouter provides mutual interconnectivity across multiple remote hosts.

NoRouter is mostly expected to be used in a dev environment for running heterogeneous multi-cloud apps.

e.g. An environment that is composed of:

• A laptop in the living room, for writing codes
• A baremetal workstation with GPU/FPGA in the office, for running machine-learning workloads
• ACI (Azure Container Instances) containers, for running other workloads that do not require a complete Kubernetes cluster
• EKS (Amazon Elastic Kubernetes Service) pods, for workloads that heavily access Amazon S3 buckets
• GKE (Google Kubernetes Engine) pods, for running gVisor-armored workloads

For production environments, setting up VPNs rather than NoRouter would be the right choice.

Download

The binaries are available at https://github.com/norouter/norouter/releases .

See also Getting Started.

Quick usage

• Install the norouter binary to all the hosts. Run norouter show-installer to show an installation script.
• Create a manifest YAML file. Run norouter show-example to show an example manifest.
• Run norouter <FILE> to start NoRouter with the specified manifest YAML file.

Example 1: Port forwarding across localhost + Docker + Kubernetes + LXD + SSH

Run norouter <FILE> with the following YAML file:

hosts:
# localhost
  local:
    vip: "127.0.42.100"
# Docker & Podman container (docker exec, podman exec)
  docker:
    cmd: "docker exec -i some-container norouter"
    vip: "127.0.42.101"
    ports: ["8080:127.0.0.1:80"]
# Writing /etc/hosts is possible on most Docker and Kubernetes containers
    writeEtcHosts: true
# Kubernetes Pod (kubectl exec)
  kube:
    cmd: "kubectl --context=some-context exec -i some-pod -- norouter"
    vip: "127.0.42.102"
    ports: ["8080:127.0.0.1:80"]
# Writing /etc/hosts is possible on most Docker and Kubernetes containers
    writeEtcHosts: true
# LXD container (lxc exec)
  lxd:
    cmd: "lxc exec some-container -- norouter"
    vip: "127.0.42.103"
    ports: ["8080:127.0.0.1:80"]
# SSH
# If your key has a passphrase, make sure to configure ssh-agent so that NoRouter can login to the remote host automatically.
  ssh:
    cmd: "ssh some-user@some-ssh-host.example.com -- norouter"
    vip: "127.0.42.104"
    ports: ["8080:127.0.0.1:80"]

In this example, 127.0.42.101:8080 on each hosts is forwarded to the port 80 of the Docker container.

Try:

$ curl http://127.0.42.101:8080
$ docker exec some-container curl http://127.0.42.101:8080
$ kubectl --context=some-context exec some-pod -- curl http://127.0.42.101:8080
$ lxc exec some-container -- curl http://127.0.42.101:8080
$ ssh some-user@some-ssh-host.example.com -- curl http://127.0.42.101:8080

Similarly, 127.0.42.102:8080 is forwarded to the port 80 of the Kubernetes Pod, 127.0.42.103:8080 is forwarderd to the port 80 of the LXD container, and 127.0.42.104:8080 is forwarded to the port 80 of some-ssh-host.example.com.

Example 2: Virtual VPN connection into docker network create networks

This example shows steps to use NoRouter for creating an HTTP proxy that works like a VPN router that connects clients into docker network create networks.

This technique also works with remote Docker, rootless Docker, Docker for Mac, and even with Podman. Read docker as podman for the usage with Podman.

First, create a Docker network named "foo", and create an nginx container named "nginx" there:

$ docker network create foo
$ docker run -d --name nginx --hostname nginx --network foo nginx:alpine

Then, create a "bastion" container in the same network, and install NoRouter into it:

$ docker run -d --name bastion --network foo alpine sleep infinity
$ norouter show-installer | docker exec -i bastion sh

Launch norouter example2.yaml with the following YAML:

hosts:
  local:
    vip: "127.0.42.100"
    http:
      listen: "127.0.0.1:18080"
    loopback:
      disable: true
  bastion:
    cmd: "docker exec -i bastion /root/bin/norouter"
    vip: "127.0.42.101"
routes:
  - via: bastion
    to: ["0.0.0.0/0", "*"]

The "nginx" container can be connected from the host as follows:

$ export http_proxy=http://127.0.0.1:18080
$ curl http://nginx

If you are using Podman, try curl http://nginx.dns.podman rather than curl http://nginx .

Example 3: Virtual VPN connection into Kubernetes networks

Example 2 can be also applied to Kubernetes clusters, just by replacing docker exec with kubectl exec.

$ export http_proxy=http://127.0.0.1:18080
$ curl http://nginx.default.svc.cluster.local

Example 4: Aggregate VPCs of AWS, Azure, and GCP

The following example provides an HTTP proxy that virtually aggregates VPCs of AWS, Azure, and GCP:

hosts:
  local:
    vip: "127.0.42.100"
    http:
      listen: "127.0.0.1:18080"
  aws_bastion:
    cmd: "ssh aws_bastion -- ~/bin/norouter"
    vip: "127.0.42.101"
  azure_bastion:
    cmd: "ssh azure_bastion -- ~/bin/norouter"
    vip: "127.0.42.102"
  gcp_bastion:
    cmd: "ssh gcp_bastion -- ~/bin/norouter"
    vip: "127.0.42.103"
routes:
  - via: aws_bastion
    to:
      - "*.compute.internal"
  - via: azure_bastion
    to:
      - "*.internal.cloudapp.net"
  - via: gcp_bastion
    to:
# Substitute "example-123456" with your own GCP project ID
      - "*.example-123456.internal"

The localhost can access all remote hosts in these networks:

$ export http_proxy=http://127.0.0.1:18080
$ curl http://ip-XXX-XXX-XX-XXX.ap-northeast-1.compute.internal
$ curl http://some-azure-host.internal.cloudapp.net
$ curl http://some-gcp-host.asia-northeast1-b.c.example-123456.internal

Documentation

• Top
• Getting Started
  • Download
  • First example
  • Name resolution
  • VPN-ish mode
• Examples
  • Docker
  • Podman
  • Kubernetes
  • LXD
  • SSH
  • Azure Container Instances
  • AWS/Azure/GCP VPCs
• Troubleshooting
• Command reference
  • norouter
  • norouter manager
  • norouter agent
  • norouter show-example
  • norouter show-installer
• YAML reference
• How it works
• Roadmap
• Similar projects
• Artwork

from  https://github.com/norouter/norouter

-------

我的补充说明：

上文里的‘Installing NoRouter from source’部分被我删除了，因为运行make会遇到错误。

在linux vps上，首先安装go环境，最低需为1.17版。然后，

go install github.com/norouter/norouter/cmd/norouter@latest

root@racknerd-7b97d8:~# which norouter

/root/go1.18.1.linux-amd64/go/gopath/bin/norouter

root@racknerd-7b97d8:~# norouter -h

NAME:

   norouter - the easiest multi-host & multi-cloud networking ever. No root privilege is required.
USAGE:

   norouter [global options] command [command options] [arguments...]



VERSION:

   0.6.4



DESCRIPTION:

   NoRouter is the easiest multi-host & multi-cloud networking ever.

   And yet, NoRouter does not require any privilege such as `sudo` or `docker run --privileged`.

   

   NoRouter implements unprivileged networking by using multiple loopback addresses such as 127.0.42.101 and 127.0.42.102.

   The hosts in the network are connected by forwarding packets over stdio streams like `ssh`, `docker exec`, `podman exec`, `kubectl exec`, and whatever.

   

   Quick usage:

   - Install the `norouter` binary to all the hosts. Run `norouter show-installer` to show an installation script.

   - Create a manifest YAML file. Run `norouter show-example` to show an example manifest.

   - Run `norouter <FILE>` to start NoRouter with the specified manifest YAML file.

   

   Web site: https://norouter.io



COMMANDS:

   manager, m             manager (default subcommand)

   agent                  agent (No need to launch manually)

   show-example, show-ex  show an example manifest

   show-installer         show script for installing NoRouter to other hosts

   help, h                Shows a list of commands or help for one command



GLOBAL OPTIONS:

   --debug            debug mode (default: false)

   --open-editor, -e  open an editor for a temporary manifest file, with an example content (default: false)

   --help, -h         show help (default: false)

   --version, -v      print the version (default: false)
root@racknerd-7b97d8:~#