功能介绍
- 对用户无感知,无需配置系统代理,自动接管所有应用程序(如浏览器和终端工具)的连网流量(类似proxifier的功能)
- 支持根据 IP、域名、GEOIP 规则进行分流,屏蔽特定网站
- DNS 解析对 CDN 友好
- 可以查看所有经过 Reborn 转发的连接
流量监控功能
可以设置是否进行网络信息统计、是否在状态栏显示实时网速、状态栏是否使用窄模式。
注意事项
reborn
作为前端配合其他工具使用,则需要对其他工具配置进程规则。~/Library/Application Support/Reborn/XLogs
目录下导航
QA
Reborn
已启用,并接管了流量
1. 如何判断 ifconfig
,可以看到 utun6
为 Reborn
创建的虚拟网卡utun6: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500
inet 240.0.200.2 --> 240.0.200.255 netmask 0xffffff00
inet6 fe80::147e:ad68:d777:e455%utun6 prefixlen 64 secured scopeid 0xf
nd6 options=201<PERFORMNUD,DAD>
netstat -nr
,可以看到 utun6
作为默认下一跳地址排在第一位Routing tables
Internet:
Destination Gateway Flags Refs Use Netif Expire
default 240.0.200.1 UGSc 71 21 utun6
default 192.168.1.1 UGScI 11 0 en0
ping
任意地址,响应时间都是小数毫秒级别,说明 icmp 协议均被本地接管➜ reborn git:(master) ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8): 56 data bytes
64 bytes from 8.8.8.8: icmp_seq=0 ttl=255 time=0.169 ms
64 bytes from 8.8.8.8: icmp_seq=1 ttl=255 time=0.201 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=255 time=0.312 ms
64 bytes from 8.8.8.8: icmp_seq=3 ttl=255 time=0.174 ms
64 bytes from 8.8.8.8: icmp_seq=4 ttl=255 time=0.193 ms
^C
--- 8.8.8.8 ping statistics ---
5 packets transmitted, 5 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 0.169/0.210/0.312/0.052 ms
2. 如何作为前端使用
ss-local
作为后端[RULES]
...
PROCESS, ss-local, DIRECT
...
3. 使用 iPhone 的个人热点并以 USB 方式连接电脑, 会造成个人热点以规律的方式连接断开
4. 卸载
Reborn.app/Contents/Resources/Uninstall.sh
后,直接删除 Reborn.app 即可.unzip Reborn.zip
(释放出Reborn.app目录)
open Reborn.app
(在mac的屏幕顶部就会出现reborn的图标)或者:
mv Reborn.app /Applications/
server = yourserver.com port = 8388 method = rc4-md5 password = password
这4项参数的值分别改为你的ss账号的相应参数的值。
重启reborn.点击mac的屏幕顶部的reborn的图标,点击start.整个mac机器就处于翻墙状态,浏览器不要设置代理,浏览器即可翻墙。
项目地址:
https://github.com/langyanduan/Reborn
https://github.com/langyanduan/Reborn/issues/35
下载地址:
https://github.com/langyanduan/Reborn/releases/download/0.5.53/Reborn.zip
-----
A iOS proxy based on Network Extension.
This project was bootstrapped with Create React Native App.
Below you'll find information about performing common tasks. The most recent version of this guide is available here.
Table of Contents
- Updating to New Releases
- Available Scripts
- Writing and Running Tests
- Environment Variables
- Adding Flow
- Customizing App Display Name and Icon
- Sharing and Deployment
- Troubleshooting
Updating to New Releases
You should only need to update the global installation of create-react-native-app
very rarely, ideally never.
Updating the react-native-scripts
dependency of your app should be as simple as bumping the version number in package.json
and reinstalling your project's dependencies.
Upgrading to a new version of React Native requires updating the react-native
, react
, and expo
package versions, and setting the correct sdkVersion
in app.json
. See the versioning guide for up-to-date information about package version compatibility.
Available Scripts
If Yarn was installed when the project was initialized, then dependencies will have been installed via Yarn, and you should probably use it to run these commands as well. Unlike dependency installation, command running syntax is identical for Yarn and NPM at the time of this writing.
npm start
Runs your app in development mode.
Open it in the Expo app on your phone to view it. It will reload if you save edits to your files, and you will see build errors and logs in the terminal.
Sometimes you may need to reset or clear the React Native packager's cache. To do so, you can pass the --reset-cache
flag to the start script:
npm start --reset-cache
# or
yarn start --reset-cache
npm test
Runs the jest test runner on your tests.
npm run ios
Like npm start
, but also attempts to open your app in the iOS Simulator if you're on a Mac and have it installed.
npm run android
Like npm start
, but also attempts to open
your app on a connected Android device or emulator. Requires an
installation of Android build tools (see React Native docs
for detailed setup). We also recommend installing Genymotion as your
Android emulator. Once you've finished setting up the native build
environment, there are two options for making the right copy of adb
available to Create React Native App:
Using Android Studio's adb
- Make sure that you can run adb from your terminal.
- Open Genymotion and navigate to
Settings -> ADB
. Select “Use custom Android SDK tools” and update with your Android SDK directory.
Using Genymotion's adb
- Find Genymotion’s copy of adb. On macOS for example, this is normally
/Applications/Genymotion.app/Contents/MacOS/tools/
. - Add the Genymotion tools directory to your path (instructions for Mac, Linux, and Windows).
- Make sure that you can run adb from your terminal.
npm run eject
This will start the process of "ejecting" from Create React Native App's build scripts. You'll be asked a couple of questions about how you'd like to build your project.
Warning: Running eject is a permanent action (aside from whatever version control system you use). An ejected app will require you to have an Xcode and/or Android Studio environment set up.
Customizing App Display Name and Icon
You can edit app.json
to include configuration keys under the expo
key.
To change your app's display name, set the expo.name
key in app.json
to an appropriate string.
To set an app icon, set the expo.icon
key in app.json
to be either a local path or a URL. It's recommended that you use a 512x512 png file with transparency.
Writing and Running Tests
This project is set up to use jest
for tests. You can configure whatever testing strategy you like, but
jest works out of the box. Create test files in directories called __tests__
or with the .test
extension to have the files loaded by jest. See the the template project for an example test. The jest documentation is also a wonderful resource, as is the React Native testing tutorial.
Environment Variables
You can configure some of Create React Native App's behavior using environment variables.
Configuring Packager IP Address
When starting your project, you'll see something like this for your project URL:
exp://192.168.0.2:19000
The "manifest" at that URL tells the Expo app how to
retrieve and load your app's JavaScript bundle, so even if you load it
in the app via a URL like exp://localhost:19000
, the Expo client app will still try to retrieve your app at the IP address that the start script provides.
In some cases, this is less than ideal. This might be the
case if you need to run your project inside of a virtual machine and you
have to access the packager via a different IP address than the one
which prints by default. In order to override the IP address or hostname
that is detected by Create React Native App, you can specify your own
hostname via the REACT_NATIVE_PACKAGER_HOSTNAME
environment variable:
Mac and Linux:
REACT_NATIVE_PACKAGER_HOSTNAME='my-custom-ip-address-or-hostname' npm start
Windows:
set REACT_NATIVE_PACKAGER_HOSTNAME='my-custom-ip-address-or-hostname'
npm start
The above example would cause the development server to listen on exp://my-custom-ip-address-or-hostname:19000
.
Adding Flow
Flow is a static type checker that helps you write code with fewer bugs. Check out this introduction to using static types in JavaScript if you are new to this concept.
React Native works with Flow out of the box, as long as your Flow version matches the one used in the version of React Native.
To add a local dependency to the correct Flow version to a Create React Native App project, follow these steps:
- Find the Flow
[version]
at the bottom of the included .flowconfig - Run
npm install --save-dev flow-bin@x.y.z
(oryarn add --dev flow-bin@x.y.z
), wherex.y.z
is the .flowconfig version number. - Add
"flow": "flow"
to thescripts
section of yourpackage.json
. - Add
// @flow
to any files you want to type check (for example, toApp.js
).
Now you can run npm run flow
(or yarn flow
) to check the files for type errors.
You can optionally use a plugin for your IDE or editor for a better integrated experience.
To learn more about Flow, check out its documentation.
Sharing and Deployment
Create React Native App does a lot of work to make app setup and development simple and straightforward, but it's very difficult to do the same for deploying to Apple's App Store or Google's Play Store without relying on a hosted service.
Publishing to Expo's React Native Community
Expo provides free hosting for the JS-only apps created by CRNA, allowing you to share your app through the Expo client app. This requires registration for an Expo account.
Install the exp
command-line tool, and run the publish command:
$ npm i -g exp
$ exp publish
Building an Expo "standalone" app
You can also use a service like Expo's standalone builds if you want to get an IPA/APK for distribution without having to build the native code yourself.
Ejecting from Create React Native App
If you want to build and deploy your app yourself, you'll need to eject from CRNA and use Xcode and Android Studio.
This is usually as simple as running npm run eject
in your project, which will walk you through the process. Make sure to install react-native-cli
and follow the native code getting started guide for React Native.
Should I Use ExpoKit?
If you have made use of Expo APIs while working on your project, then those API calls will stop working if you eject to a regular React Native project. If you want to continue using those APIs, you can eject to "React Native + ExpoKit" which will still allow you to build your own native code and continue using the Expo APIs. See the ejecting guide for more details about this option.
Troubleshooting
Networking
If you're unable to load your app on your phone due to a network timeout or a refused connection, a good first step is to verify that your phone and computer are on the same network and that they can reach each other. Create React Native App needs access to ports 19000 and 19001 so ensure that your network and firewall settings allow access from your device to your computer on both of these ports.
Try opening a web browser on your phone and opening the URL that the packager script prints, replacing exp://
with http://
. So, for example, if underneath the QR code in your terminal you see:
exp://192.168.0.1:19000
Try opening Safari or Chrome on your phone and loading
http://192.168.0.1:19000
and
http://192.168.0.1:19001
If this works, but you're still unable to load your app by scanning the QR code, please open an issue on the Create React Native App repository with details about these steps and any other error messages you may have received.
If you're not able to load the http
URL in
your phone's web browser, try using the tethering/mobile hotspot feature
on your phone (beware of data usage, though), connecting your computer
to that WiFi network, and restarting the packager. If you are using a
VPN you may need to disable it.
iOS Simulator won't open
If you're on a Mac, there are a few errors that users sometimes see when attempting to npm run ios
:
- "non-zero exit code: 107"
- "You may need to install Xcode" but it is already installed
- and others
There are a few steps you may want to take to troubleshoot these kinds of errors:
- Make sure Xcode is installed and open it to accept the license agreement if it prompts you. You can install it from the Mac App Store.
- Open Xcode's Preferences, the Locations tab, and make sure that the
Command Line Tools
menu option is set to something. Sometimes when the CLI tools are first installed by Homebrew this option is left blank, which can prevent Apple utilities from finding the simulator. Make sure to re-runnpm/yarn run ios
after doing so. - If that doesn't work, open the Simulator, and under the app menu select
Reset Contents and Settings...
. After that has finished, quit the Simulator, and re-runnpm/yarn run ios
.
QR Code does not scan
If you're not able to scan the QR code, make sure your phone's camera is focusing correctly, and also make sure that the contrast on the two colors in your terminal is high enough. For example, WebStorm's default themes may not have enough contrast for terminal QR codes to be scannable with the system barcode scanners that the Expo app uses.
If this causes problems for you, you may want to try changing your terminal's color theme to have more contrast, or running Create React Native App from a different terminal. You can also manually enter the URL printed by the packager script in the Expo app's search bar to load it manually.
from https://github.com/langyanduan/Reborn-iOS