dns server with high performance, based on dpdk.
Documentation
Please refer to http://dpdk.org/doc.
Install dpdk
tar xf dpdk-17.02.1.tar.xz -C /root
cd /root
mv dpdk-17.02.1 dpdk
cd dpdk
make config T=x86_64-native-linuxapp-gcc
make
make install T=x86_64-native-linuxapp-gcc
Set environment
edit .profile or .bashrc, add the following:
export RTE_SDK=/root/dpdk
export RTE_TARGET=x86_64-native-linuxapp-gcc
Usage
# git clone https://github.com/alandtsang/mydpdkdns.git
# cd mydpdkdns/tools
record eth info
# ./recordeth.sh eth0
It will record the eth0 information to ethinfo file.
If recordeth.sh fails to execute, you need to manually create ethinfo.
e.g.
DEV=eth0
IPADDR=192.168.44.129
NETMADK=255.255.255.0
MAC=08:00:27:cf:bb:76
GATEWAY=192.168.44.2
insert modules and mount hugetlbfs
# ./preparedpdk.sh eth0
It will bind eth0 to DPDK.
start program
# ./start.sh
/root/mydpdkdns
-- RTE_SDK path：/root/dpdk
-- RTE_TARGET path：x86_64-native-linuxapp-gcc
-- RTE_SDK include path：/root/dpdk/include
-- RTE_SDK include path：/root/dpdk/lib
-- Configuring done
-- Generating done
-- Build files have been written to: /home/mydpdkdns/build
Scanning dependencies of target dserver
[100%] Built target dserver
EAL: Detected 4 lcore(s)
EAL: No free hugepages reported in hugepages-1048576kB
EAL: Probing VFIO support...
EAL: PCI device 0000:02:01.0 on NUMA socket -1
EAL: probe driver: 8086:100f net_e1000_em
EAL: PCI device 0000:02:06.0 on NUMA socket -1
EAL: probe driver: 8086:100f net_e1000_em
EAL: PCI device 0000:02:07.0 on NUMA socket -1
EAL: probe driver: 8086:100f net_e1000_em
before Initialise each port
APP: Initialising port 0 ...
KNI: pci: 02:06:00 8086:100f
after Initialise each port
Checking link status
done
Port 0 Link Up - speed 1000 Mbps - full-duplex
APP: Lcore 1 is writing to port 0
APP: Lcore 2 is working to port 0
APP: Lcore 3 is sending to port 0
APP: Lcore 0 is reading from port 0
configure IP and MAC addresses
upeth.sh will read the nic information in the ethinfo, and then configure IP and MAC address for vEth0.
# ./upeth.sh
APP: Configure network interface of 0 up
Now, you can test the dns server.
stop program
# ./stop.sh
unbind dpdk
# ./unbind.sh
traffic monitoring
# ./monitor.sh
port:0 rx:399910 p/s 31994168 bytes/s tx:397452 p/s 36577360 bytes/s dropped:0
port:0 rx:400474 p/s 32039324 bytes/s tx:400478 p/s 36843976 bytes/s dropped:0
port:0 rx:396535 p/s 31724162 bytes/s tx:396478 p/s 36475976 bytes/s dropped:0
port:0 rx:401855 p/s 32149828 bytes/s tx:399069 p/s 36729068 bytes/s dropped:0
Support edns
dig @192.168.44.129 www.baidu.com +subnet=1.2.3.4
; <<>> DiG 9.11.1-P3 <<>> @192.168.44.129 www.baidu.com +subnet=1.2.3.4
; (1 server found)
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 28688
;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 1
;; OPT PSEUDOSECTION:
; EDNS: version: 0, flags:; udp: 512
; CLIENT-SUBNET: 1.2.3.4/32/0
;; QUESTION SECTION:
;www.baidu.com. IN A
;; ANSWER SECTION:
www.baidu.com. 0 IN A 153.37.234.35
;; Query time: 0 msec
;; SERVER: 192.168.44.129#53(192.168.44.129)
;; WHEN: Tue Jul 18 17:02:16 CST 2017
;; MSG SIZE rcvd: 82
Get Help
The fastest way to get response is to send email to my mail:
from https://github.com/alandtsang/mydpdkdns
No comments:
Post a Comment