Total Pageviews

Friday 31 July 2020

Stunnel的加强版替代品:go-tunnel


TLS/SSL Tunnel - A modern STunnel replacement written in golang.

go-tunnel,a robust quic/TLS Tunnel (Stunnel replacement)

What is it?

A supercharged Stunnel replacement written in golang. is in a sense a proxy enabling addition of network-encryption to existing clients without any source code changes.

Features

  • TLS 1.3 for client and server mode (TLS Connect or TLS Listen)
  • Quic client and server mode (Quic listen or Quic connect)
  • Optional SOCKS for connecting endpoint (SOCKS server)
  • Optional TLS client certificate (for Quic/TLS Connect)
  • SNI on the listening Quic/TLS server
  • Ratelimits - global and per-IP
  • Proxy-Protocol v1 support when connecting to downstream servers
  • YAML Configuration file
  • Access Control on per IP or subnet basis (allow/deny combination)
  • Strong ciphers and curves preferred on both client & server
  • Comes with end-to-end tests covering variety of scenarios
Note that TLS private keys need to be unencrypted; we don't support password protected private keys yet. The main reason for this is that when gotun is daemonized, it may not be possible to obtain the password in an interactive manner. Additionally, for SNI support, it may be impossible to ask for interactive password in the middle of a client connection setup.

Motivating Example

Lets assume you have a public server on proxy.example.com listening on Quic/UDP supporting SOCKS protocol for connecting to outbound destinations. For security reasons, you want to limit access to only clients that are TLS authenticated (TLS client certs).
Lets also assume that you have a laptop that wants to connect to the SOCKS server efficiently.
Using two instances of gotun, you can accomplish this:
  1. Local gotun instance on your laptop configured to accept TCP and connect using Quic to the external server proxy.example.com
  2. Server gotun instance on the external host configured to accept authenticated Quic connections and proxy via SOCKS.
  3. Configure your laptop browser to use the "local" SOCKS server.
Using Quic to connect the two gotun instances reduces the TCP/TLS overhead of every socks connection. And, TLS client certs enables strong authentication on the external server.
The picture below explains the connectivity:
example diagram
In the setup above, the laptop browser clients will treat 127.0.0.1:1080 as their "real" SOCKS server. Behind the scenes, gotun will tunnel the packets via Quic to a remote endpoint where a second gotun instance will unbundle the SOCKS protocol and connect to the final destination.
The config file shown above actually demonstrates a really secure tunnel where the server and client both use certificates to authenticate each other.
Assuming the config on "Gotunnel Laptop" is in file client.conf, and the config on "Gotunnel Server" is in server.conf, to run the above example, on host "Gotunnel-A":
gotun client.conf
And, on the public server:
gotun server.conf
The -d flag for gotun runs it in debug mode - where the logs are sent to STDOUT. It's not recommended to run a production server in debug mode (too many log messages).

Building go-tunnel

You need a reasonably new Golang toolchain (1.14+). And the go executable needs to be in your path. Then run:
make
Make essentially runs:
./build
build will build the binary gotun and places it in TARGET specific directory. e.g., for linux-amd64, the binaries will be in ./bin/linux-amd64; and OS X, it will be in ./bin/darwin-amd64 and so on.
You can cross-compile 'go-tun' by passing appropriate architecture names to the script. e.g., to build on host OS X for openbsd-amd64:
./build --arch=openbsd-amd64
You can build a statically linked executable (with no other runtime dependency):
./build -s
The script also has other options. To see them::
./build --help

Running go-tunnel

gotun takes a YAML config file as its sole command line argument. The server does not fork itself into the background. If you need that capability, explore your platform's init toolchain (e.g., start-stop-daemon).
The server can run in debug mode; e.g., on Linux x86_64:
./bin/linux-amd64/gotun -d etc/gotun.conf
In debug mode, the logs are sent to STDOUT and the debug level is set to DEBUG (i.e., verbose).
In the absence of the -d flag, the default log level is INFO or whatever is set in the config file.

Config File

The config file is a YAML v2 document. A complete, self-explanatory example is below:
# Log file; can be one of:
#  - Absolute path
#  - SYSLOG
#  - STDOUT
#  - STDERR
log: STDOUT
#log: STDOUT

# Logging level - "DEBUG", "INFO", "WARN", "ERROR"
loglevel: DEBUG

# config dir - where all non-absolute file references below will
# apply.
config-dir: /etc/gotun

# Listeners
listen:
    # Listen plain text
    -   address: 127.0.0.1:9090
        allow: [127.0.0.1/8, 11.0.1.0/24, 11.0.2.0/24]
        deny: []

        timeout:
            connect: 5
            read: 2
            write: 2

        # limit to N reqs/sec globally
        ratelimit:
            global: 2000
            per-host: 30
            cache-size: 10000

        # Connect via TLS
        connect:
            address: host.name:443
            bind: my.ip.address
            tls:
                cert: /path/to/crt
                key: /path/to/key
                # path to CA bundle that can verify the server certificate.
                # This can be a file or a directory.
                ca: /path/to/ca.crt

            # if address is a name, then servername is populated from it.
            # else, if it is an IP address, it must be set below.
            # Not setting it => no verification (InsecureSkipVerify = true)
            # servername: a.example.com

    # Listen using TLS with SNI
    -   address: 127.0.0.1:9443
        allow: [127.0.0.1/8, 11.0.1.0/24, 11.0.2.0/24]
        deny: []
        timeout:
            connect: 5
            read: 2
            write: 2

        tls:
            sni: /path/to/cert/dir

            # clientcert can be "required" or "optional" or "blank" or absent.
            # if it is required/optional, then clientca must be set to the list of
            # CAs that can verify a presented client cert.
            client-cert: required
            client-ca: /path/to/clientca.crt

        # plain connect but use proxy-protocol v1 when speaking
        # downstream
        connect:
            address: 55.66.77.88:80
            proxyprotocol: v1


    # Listen on Quic + client auth and connect to SOCKS
    -   address: 127.0.0.1:8443
        tls:
            quic: true
            cert: /path/to/crt
            key: /path/to/key
            # path to CA bundle that can verify the server certificate.
            # This can be a file or a directory.
            ca: /path/to/ca.crt

            client-cert: required
            client-ca: /path/to/clientca.crt

        connect:
            address: SOCKS
The etc/ directory has example configurations for running Quic+SOCKS on a public server and a local laptop.

Using SNI

SNI is exposed via domain specific certs & keys in the tls.certdir config block. SNI is enabled by setting tls.sni config element to true; and each hostname that is requested via SNI needs a cert and key file with the file prefix of hostname. e.g., if the client is looking for hostname "blog.mydomain.com" via SNI, then gotun will look for blog.mydomain.com.crt and blog.mydomain.com.key in the directory identified by tls.certdir. The config file above has an example for SNI configured on listen address 127.0.0.1:9443.

Generating Local Certificates

If you want client authentication and don't want the hassle of using openssl or a commercial CA for obtaining the certs, you can use certik to create an easy, opinionated local CA infrastucture. Assuming you are on a linux-amd64 platform:
$ git clone https://github.com/opencoff/certik
$ cd certik
$ ./build -s
$ ./bin/linux-amd64/certik ca.db init "client CA" 
$ ./bin/linux-amd64/certik ca.db user username@example.com
$ ./bin/linux-amd64/certik ca.db export -o ca --ca
$ ./bin/linux-amd64/certik ca.db export -o username username@example.com
Now, you have ca.crt as the CA root of trust for the Quic server to validate client certs. And, the client cert/key for username@example.com is in username.crt and username.key
You can copy and use ca.crt and user's cert/key to gotun config directory and refer to it in the config file under "client-ca" and "tls.cert", "tls.key" respectively.

Security

gotun tries to be safe by default:
  • Opinionated TLS 1.3 configuration
  • All config file references are checked for safety: e.g., any TLS certs/keys are verified to have sane permissions (NOT group/world writable)

Performance Test

Using iperf3 on two debian-linux (amd64) hosts connected via Gigabit Ethernet and gotun running on either end, the performance looks like so:
$ iperf3 -V  -c 127.0.0.1 -p 9000
iperf 3.1.3
Linux ungoliant 4.15.0-2-amd64 #1 SMP Debian 4.15.11-1 (2018-03-20) x86_64
Time: Sat, 28 Apr 2018 21:18:46 GMT
Connecting to host 127.0.0.1, port 9000
      Cookie: ungoliant.1524950326.966562.77625193
      TCP MSS: 21888 (default)
[  4] local 127.0.0.1 port 35444 connected to 127.0.0.1 port 9000
Starting Test: protocol: TCP, 1 streams, 131072 byte blocks, omitting 0 seconds, 10 second test
[ ID] Interval           Transfer     Bandwidth       Retr  Cwnd
[  4]   0.00-1.00   sec  54.5 MBytes   457 Mbits/sec    0   2.50 MBytes
[  4]   1.00-2.00   sec  45.7 MBytes   383 Mbits/sec    0   2.50 MBytes
[  4]   2.00-3.00   sec  46.2 MBytes   388 Mbits/sec    0   2.50 MBytes
[  4]   3.00-4.00   sec  46.5 MBytes   390 Mbits/sec    0   2.50 MBytes
[  4]   4.00-5.00   sec  46.6 MBytes   391 Mbits/sec    0   2.50 MBytes
[  4]   5.00-6.00   sec  46.2 MBytes   388 Mbits/sec    0   2.50 MBytes
[  4]   6.00-7.00   sec  47.0 MBytes   394 Mbits/sec    0   2.50 MBytes
[  4]   7.00-8.00   sec  47.7 MBytes   400 Mbits/sec    0   2.50 MBytes
[  4]   8.00-9.00   sec  47.5 MBytes   398 Mbits/sec    0   2.50 MBytes
[  4]   9.00-10.00  sec  46.7 MBytes   392 Mbits/sec    0   2.50 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
Test Complete. Summary Results:
[ ID] Interval           Transfer     Bandwidth       Retr
[  4]   0.00-10.00  sec   475 MBytes   398 Mbits/sec    0             sender
[  4]   0.00-10.00  sec   464 MBytes   389 Mbits/sec                  receiver
CPU Utilization: local/sender 1.8% (0.0%u/1.7%s), remote/receiver 9.0% (0.6%u/8.4%s)

Access Control Rules

Go-tunnel implements a flexible ACL by combination of allow/deny rules. The rules are evaluated in the following order:
  • If explicitly denied, then host is blocked
  • If allow list is empty, then host is allowed
  • If allow list is non-empty & host is in allow-list, then host is allowed
  • Explicit denial takes precedence over explicit allow
  • Default (fall through) policy is to deny

Example of allow/deny combinations

  1. Allow all:
   allow: []
   deny:  []
  1. Only allow specific subnets and deny everyone else:
    allow: [ 192.168.55.0/24, 172.16.10.0/24, 127.0.0.1/8 ]
    deny: []
  1. Allow all except selected subnets:
    allow: []
    deny: [ 192.168.80.0/24, 172.16.5.0/24 ]
  1. Expliclty block certain hosts and explicitly allow certain subnets and block everyone else:
    allow: [ 192.168.55.0/24, 172.16.10.0/24, 127.0.0.1/8 ]
    deny:  [ 192.168.1.1/32, 192.168.80.0/24, 172.16.5.0/24 ]

Development Notes

If you are a developer, the notes here will be useful for you:
  • The code uses go modules; so, you'll need a reasonably new go toolchain (1.10+)
  • The go-tunnel code is in ./gotun:
    • main.go: main() for gotun
    • server.go: Implements TCP/TLS and Quic servers; also implements the SOCKS server protocol
    • conf.go: YAML configuration file parser
    • quicdial.go: Dial outbound connections via Quic + streams
    • tcpdial.go: Dial outbound connections via TCP
    • safety.go: Safely open files/dirs referenced in config file
  • Tests: running tests: go test -v ./gotun Some of the tests/helpers:
    • mocked_test.go: Mock servers and clients
    • tcp_test.go: Tests for TCP/TLS to TCP/TLS
    • quic_test.go: Tests for TCP/TLS to Quic and vice versa
    • socks_test.go: Tests for socks (includes a test for the example configuration above)
    • utils_test.go: test helpers (e.g., assert())
  • We build build - a a master shell script to build the daemons; it does two very important things:
    • Puts the binary in an OS/Arch specific directory
    • Injects a git version-tag into the final binary ("linker resolved symbol")
    This script can be reused for other go projects.
  • Example config files is in the etc/gotun.conf directory.

No comments:

Post a Comment