Total Pageviews

Friday, 11 September 2015

维基上的socks介绍

This article is about the internet protocol. For other uses, see Socks (disambiguation).
Internet protocol suite
Application layer
Transport layer
Internet layer
Link layer
Socket Secure (SOCKS) is an Internet protocol that routes network packets between a client and server through a proxy server. SOCKS5 additionally provides authentication so only authorized users may access a server. Practically, a SOCKS server proxies TCP connections to an arbitrary IP address, and provides a means for UDP packets to be forwarded.
SOCKS performs at Layer 5 of the OSI model (the session layer, an intermediate layer between the presentation layer and the transport layer).

History[edit]

The protocol was originally developed/designed by David Koblas, a system administrator of MIPS Computer Systems. After MIPS was taken over by Silicon Graphics in 1992, Koblas presented a paper on SOCKS at that year's Usenix Security Symposium, making SOCKS publicly available.[1] The protocol was extended to version 4 by Ying-Da Lee of NEC.
The SOCKS reference architecture and client are owned by Permeo Technologies,[2] a spin-off from NEC. (Blue Coat Systems bought out Permeo Technologies.)
The SOCKS5 protocol was originally a security protocol that made firewalls and other security products easier to administer.[citation needed] It was approved by the IETF in 1996.[3] The protocol was developed in collaboration with Aventail Corporation, which markets the technology outside of Asia.[4]

Usage[edit]

SOCKS is a de facto standard for circuit-level gateways[citation needed].
Another use of SOCKS is as a circumvention tool, allowing traffic to bypass Internet filtering to access content otherwise blocked, e.g., by governments, workplaces, schools, and country-specific web services.[5]
Some SSH suites, such as OpenSSH, support dynamic port forwarding that allows the user to create a local SOCKS proxy.[6] This can free the user from the limitations of connecting only to a predefined remote port and server.
The Tor onion proxy software presents a SOCKS interface to its clients.

Comparison to HTTP proxying[edit]

SOCKS operates at a lower level than HTTP proxying: SOCKS uses a handshake protocol to inform the proxy software about the connection that the client is trying to make, and then acts as transparently as possible, whereas a regular proxy may interpret and rewrite headers (say, to employ another underlying protocol, such as FTP; however, an HTTP proxy simply forwards an HTTP request to the desired HTTP server). Though HTTP proxying has a different usage model in mind, the CONNECTmethod allows for forwarding TCP connections; however, SOCKS proxies can also forward UDP traffic and work in reverse, while HTTP proxies cannot. HTTP proxies are traditionally more aware of the HTTP protocol, performing higher-level filtering (though that usually only applies to GET and POST methods, not the CONNECT method).

SOCKS[edit]

Bill wishes to communicate with Jane over the internet, but a firewall between them exists on his network, where Bill is not authorized to communicate with Jane directly. So, Bill connects to the SOCKS proxy on his network, informing it about the connection he wishes to make to Jane; the SOCKS proxy opens a connection through the firewall and facilitates the communication between Bill and Jane.
For more information on the technical specifics of the SOCKS protocol, see the sections below.

HTTP[edit]

Bill wishes to download a web page from Jane, who runs a web server. Bill cannot directly connect to Jane's server, as a firewall has been put in place on his network. In order to communicate with the server, Bill connects to his network's HTTP proxy. His web browser communicates with the proxy in exactly the same way that it would directly with Jane's server if that was possible; that is, it sends a standard HTTP request header. The HTTP proxy connects to Jane's server, and then transmits back to Bill any data that Jane's server returns.[7]

Protocol[edit]

SOCKS4[edit]

A typical SOCKS4 connection request looks like this:
SOCKS Client to SOCKS Server:
  • field 1: SOCKS version number, 1 byte, must be 0x04 for this version
  • field 2: command code, 1 byte:
    • 0x01 = establish a TCP/IP stream connection
    • 0x02 = establish a TCP/IP port binding
  • field 3: network byte order port number, 2 bytes
  • field 4: network byte order IP address, 4 bytes
  • field 5: the user ID string, variable length, terminated with a null (0x00)
SOCKS Server to SOCKS client:
  • field 1: null byte
  • field 2: status, 1 byte:
    • 0x5a = request granted
    • 0x5b = request rejected or failed
    • 0x5c = request failed because client is not running identd (or not reachable from the server)
    • 0x5d = request failed because client's identd could not confirm the user ID string in the request
  • field 3: 2 arbitrary bytes, that should be ignored
  • field 4: 4 arbitrary bytes, that should be ignored
This is a SOCKS4 request to connect Fred to 66.102.7.99:80, the server replies with an "OK".
  • Client: 0x04 | 0x01 | 0x00 0x50 | 0x42 0x66 0x07 0x63 | 0x46 0x72 0x65 0x64 0x00
    • The last field is 'Fred' in ASCII, followed by a null byte.
  • Server: 0x00 | 0x5a | 0xXX 0xXX | 0xXX 0xXX 0xXX 0xXX
    • 0xXX can be any byte value. The SOCKS4 protocol specifies the values of these bytes should be ignored.
From this point onwards, any data sent from the SOCKS client to the SOCKS server is relayed to 66.102.7.99, and vice versa.
The command field may be 0x01 for "connect" or 0x02 for "bind"; the "bind" command allows incoming connections for protocols such as active FTP.

SOCKS4a[edit]

SOCKS4a extends the SOCKS4 protocol to allow a client to specify a destination domain name rather than an IP address;[8] this is useful when the client itself cannot resolve the destination host's domain name to an IP address.
The client should set the first three bytes of DSTIP to NULL and the last byte to a non-zero value. (This corresponds to IP address 0.0.0.x, with x nonzero, an inadmissible destination address and thus should never occur if the client can resolve the domain name.) Following the NULL byte terminating USERID, the client must send the destination domain name and terminate it with another NULL byte. This is used for both "connect" and "bind" requests.
Client to SOCKS server:
  • field 1: SOCKS version number, 1 byte, must be 0x04 for this version
  • field 2: command code, 1 byte:
    • 0x01 = establish a TCP/IP stream connection
    • 0x02 = establish a TCP/IP port binding
  • field 3: network byte order port number, 2 bytes
  • field 4: deliberate invalid IP address, 4 bytes, first three must be 0x00 and the last one must not be 0x00
  • field 5: the user ID string, variable length, terminated with a null (0x00)
  • field 6: the domain name of the host we want to contact, variable length, terminated with a null (0x00)
Server to SOCKS client:
  • field 1: null byte
  • field 2: status, 1 byte:
    • 0x5a = request granted
    • 0x5b = request rejected or failed
    • 0x5c = request failed because client is not running identd (or not reachable from the server)
    • 0x5d = request failed because client's identd could not confirm the user ID string in the request
  • field 3: network byte order port number, 2 bytes
  • field 4: network byte order IP address, 4 bytes
A server using protocol SOCKS4A must check the DSTIP in the request packet. If it represents address 0.0.0.x with nonzero x, the server must read in the domain name that the client sends in the packet. The server should resolve the domain name and make connection to the destination host if it can.

SOCKS5[edit]

The SOCKS5 protocol is defined in RFC 1928. It is an extension of the SOCKS4 protocol; it offers more choices for authentication, and adds support for IPv6 and UDP, the latter of which can be used for DNS lookups. The initial handshake consists of the following:
  • Client connects and sends a greeting which includes a list of authentication methods supported.
  • Server chooses one (or sends a failure response if none of the offered methods are acceptable).
  • Several messages may now pass between the client and the server depending on the authentication method chosen.
  • Client sends a connection request similar to SOCKS4.
  • Server responds similar to SOCKS4.
The authentication methods supported are numbered as follows:
  • 0x00: No authentication
  • 0x01: GSSAPI[9]
  • 0x02: Username/Password[10]
  • 0x03–0x7F: methods assigned by IANA[11]
  • 0x80–0xFE: methods reserved for private use
The initial greeting from the client is
  • field 1: SOCKS version number (must be 0x05 for this version)
  • field 2: number of authentication methods supported, 1 byte
  • field 3: authentication methods, variable length, 1 byte per method supported
The server's choice is communicated:
  • field 1: SOCKS version, 1 byte (0x05 for this version)
  • field 2: chosen authentication method, 1 byte, or 0xFF if no acceptable methods were offered
The subsequent authentication is method-dependent. Username and password authentication (method 0x02) is described in RFC 1929:
For username/password authentication the client's authentication request is
  • field 1: version number, 1 byte (must be 0x01)
  • field 2: username length, 1 byte
  • field 3: username
  • field 4: password length, 1 byte
  • field 5: password
Server response for username/password authentication:
  • field 1: version, 1 byte
  • field 2: status code, 1 byte.
    • 0x00 = success
    • any other value = failure, connection must be closed
The client's connection request is
  • field 1: SOCKS version number, 1 byte (must be 0x05 for this version)
  • field 2: command code, 1 byte:
    • 0x01 = establish a TCP/IP stream connection
    • 0x02 = establish a TCP/IP port binding
    • 0x03 = associate a UDP port
  • field 3: reserved, must be 0x00
  • field 4: address type, 1 byte:
    • 0x01 = IPv4 address
    • 0x03 = Domain name
    • 0x04 = IPv6 address
  • field 5: destination address of
    • 4 bytes for IPv4 address
    • 1 byte of name length followed by the name for Domain name
    • 16 bytes for IPv6 address
  • field 6: port number in a network byte order, 2 bytes
Server response:
  • field 1: SOCKS protocol version, 1 byte (0x05 for this version)
  • field 2: status, 1 byte:
    • 0x00 = request granted
    • 0x01 = general failure
    • 0x02 = connection not allowed by ruleset
    • 0x03 = network unreachable
    • 0x04 = host unreachable
    • 0x05 = connection refused by destination host
    • 0x06 = TTL expired
    • 0x07 = command not supported / protocol error
    • 0x08 = address type not supported
  • field 3: reserved, must be 0x00
  • field 4: address type, 1 byte:
    • 0x01 = IPv4 address
    • 0x03 = Domain name
    • 0x04 = IPv6 address
  • field 5: destination address of
    • 4 bytes for IPv4 address
    • 1 byte of name length followed by the name for Domain name
    • 16 bytes for IPv6 address
  • field 6: network byte order port number, 2 bytes

Software[edit]

Servers[edit]

SOCKS proxy server implementations[edit]

  • Antinat is a flexible SOCKS server and client library. It supports SOCKS 4, SOCKS 4a, SOCKS 5, authentication, CHAP, XML firewalling, Win32, server chaining, and UDP. It also contains very experimental IPv6 support.
  • Dante is a circuit-level SOCKS server that can be used to provide convenient and secure network connectivity, requiring only the host Dante runs on to have external network connectivity.[citation needed]
  • Srelay is a small SOCKS4/SOCKS5 proxy server.
  • SS5 SS5 is a socks server that implements the SOCKS v4 and v5 protocol.
  • Sun Java System Web Proxy Server is a caching proxy server running on Solaris, Linux and Windows servers that supports HTTPS, NSAPI I/O filters, dynamic reconfiguration, SOCKSv5 and reverse proxy.
  • WinGate is a multi-protocol proxy server and SOCKS server for Microsoft Windows which supports SOCKS4, SOCKS4a and SOCKS5 (including UDP-ASSOCIATE and GSSAPI auth). It also supports handing over SOCKS connections to the HTTP proxy, so can cache and scan HTTP over SOCKS.

Other programs providing SOCKS server interface[edit]

  • OpenSSH allows dynamic creation of tunnels, specified via a subset of the SOCKS protocol, supporting the CONNECT command.
  • PuTTY is a Win32 SSH client that supports local creation of SOCKS (dynamic) tunnels through remote SSH servers.
  • Tor is a system intended to enable online anonymity. Tor offers a SOCKS server interface to its clients.

Clients[edit]

Client software must have native SOCKS support in order to connect through SOCKS. There are programs that allow to circumvent this limitation:

Proxifiers[edit]

Translating proxies[edit]

References[edit]

  1. ^ Darmohray, Tina. "Firewalls and fairy tales". ;LOGIN:. Vol 30, no. 1.
  2. ^ Archive copy at the Wayback Machine
  3. ^ RFC 1928
  4. ^ CNET: Cyberspace from outer space
  5. ^ "2010 Circumvention Tool Usage Report" (PDF). The Berkman Center for Internet & Society at Harvard University. October 2010.
  6. ^ "OpenSSH FAQ".
  7. ^ "Hypertext Transfer Protocol (HTTP/1.1): Message Syntax and Routing". Retrieved 2014-08-01.
  8. ^ Ying-Da Lee. "SOCKS 4A: A Simple Extension to SOCKS 4 Protocol". OpenSSH. Retrieved 2013-04-03.
  9. ^ "RFC 1961". Tools.ietf.org. Retrieved 2009-06-19.
  10. ^ "RFC 1929". Tools.ietf.org. Retrieved 2009-06-19.
  11. ^ IANA.org

External links[edit]


from https://en.wikipedia.org/wiki/SOCKS
Posted by at
Labels: